+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: SPC Horsham Project IS 550 (/showthread.php?tid=906)
SPC Horsham Project IS 550 - supratruck - 01-07-2017
Lexusboy Supratruck,
Are you bring a Jap vehicle for the club stand and are you camping?
I need this confirmed because of numbers.
I have added your name to the list.:thumbup1:
I wont be camping so just the stand pl :thumbup1:
SPC Horsham Project IS 550 - Lexusboy - 01-07-2017
Sorted:thumbup:
SPC Horsham Project IS 550 - SPChorsham.com - 01-07-2017
steviewevie Which GT30 is it exactly ?
Why the pressure regulator for the injectors ? So will you make sure you change the injectors before they max out ?
Sorry for all the questions, but please take it as a compliment that I'm very interested to hear how you get on, as I'm sure are lots of other folks here ! :biggrin:
The fuel pressure reg gives us a bit more of a margin with the std injectors
SPC Horsham Project IS 550 - steviewevie - 02-07-2017
Some more pics, courtesy of SPC Horsham.
OEM manifold still in place :
![[Image: IMG_8017Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8017Small.jpg)
New turbo manifold :
![[Image: IMG_8020Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8020Small.jpg)
GT30 turbo :
![[Image: IMG_8022Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8022Small.jpg)
OEM exhaust system still in place :
![[Image: IMG_8014Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8014Small.jpg)
OEM cat alongside new decat pipe :
![[Image: IMG_8033Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8033Small.jpg)
Decat pipe installed :
![[Image: IMG_8029Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8029Small.jpg)
Start of 3" downpipe :
![[Image: IMG_8024Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8024Small.jpg)
Next stage of downpipe :
![[Image: IMG_8028Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8028Small.jpg)
Downpipe completed :
![[Image: IMG_8038Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8038Small.jpg)
Flexi joint :
![[Image: IMG_8032Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8032Small.jpg)
Downpipe with open wastegate :
![[Image: IMG_8039Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8039Small.jpg)
Wastegate pipe and flexi joint :
![[Image: IMG_8042Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8042Small.jpg)
Electrics heat-wrapped :
![[Image: IMG_8036Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8036Small.jpg)
Exhaust brace for support :
![[Image: IMG_8040Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8040Small.jpg)
![[Image: RIMG0905.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/RIMG0905.jpg)
SPC Horsham Project IS 550 - steviewevie - 02-07-2017
Some pictures of the inlet manifold that SPC Horsham are in the process of making.
![[Image: IS200INLET026.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IS200INLET026.jpg)
![[Image: IS200INLET028.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IS200INLET028.jpg)
![[Image: IS200INLET031.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IS200INLET031.jpg)
SPC Horsham Project IS 550 - steviewevie - 02-07-2017
Pics of work being done on a new engine block for Dave Read's car.
![[Image: IMG_7993Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_7993Small.jpg)
![[Image: IMG_7994Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_7994Small.jpg)
Bored and decked :
![[Image: IMG_7995Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_7995Small.jpg)
New bearing shells in place :
![[Image: IMG_7998Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_7998Small.jpg)
Installing new ARP main bolts :
![[Image: IMG_7999Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_7999Small.jpg)
Crankshaft in place :
![[Image: IMG_8000Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8000Small.jpg)
Forged pistons installed :
![[Image: IMG_8002Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8002Small.jpg)
Forged conrods and pistons installed :
![[Image: IMG_8003Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8003Small.jpg)
Front cover and new water pump installed :
![[Image: IMG_8004Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8004Small.jpg)
Large capacity sump with turbo return fitting :
![[Image: IMG_8007Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8007Small.jpg)
Rear main seal in place :
![[Image: IMG_8008Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8008Small.jpg)
Girdle plate :
![[Image: IMG_8009Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8009Small.jpg)
SPC Horsham Project IS 550 - aaronabbott - 02-07-2017
im still waiting on a price so i can get mine done:drool:
SPC Horsham Project IS 550 - steviewevie - 02-07-2017
aaronabbott im still waiting on a price so i can get mine done:drool:
We're very pleased to be able to now welcome on board SPC Horsham as an authorised trader (their forum etc will be coming very soon). So now they're free to talk to you about prices etc, although bear in mind this is their test car, so rolling this out for members might be a different thing and they may or may not be ready to talk about pricing at this stage.
SPC Horsham Project IS 550 - Dan_Turism0 - 02-07-2017
looks awesome, i see Dave's car is being looked after in the hands of a 12 year old
kids these days are getting smarter and smarter :p
SPC Horsham Project IS 550 - Bandit - 02-07-2017
Great work there guys, very interested how in how it all goes so will be looking forward to the updates :thumbup1: