JapCarForum
Jimbobs Lexus IS200 Turbo! - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Jimbobs Lexus IS200 Turbo! (/showthread.php?tid=7339)



Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 23-02-2021

Oil replens done just got to bleed the clutch,torque crank shaft pulley and hook idle micro switch up then turn her over tomorrow is the big day Smile


Jimbobs Lexus IS200 Turbo! - john wan - 23-02-2021

Theres three sensors in a line in the block one in the sump then 3 or four in and around the intake


Jimbobs Lexus IS200 Turbo! - john wan - 23-02-2021

And that blue one right there does it come out where the air intake sensor comes out of the loom?


Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 23-02-2021

Yeah mate


Jimbobs Lexus IS200 Turbo! - john wan - 23-02-2021

That goes into the right hand side of the throtle body if you want pickys pm me your number ill send you some over not doing much just at work ha ha ha ha


Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 23-02-2021

well thanks to John Wan i know what its is and you will never guess the thing has grown legs and done a runner can i find the bleedin thing lol but least i know what its is now lol


Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 24-02-2021

Just confirmation I need to wire a fcd in as well?


Jimbobs Lexus IS200 Turbo! - Sparkystav - 24-02-2021

No, if you go into the emanage ultimate settings and then add a map for fuel cut, set every square to 4.34 that will do the same job.


Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 24-02-2021

Ok mate brill don't Spose u know what the idle signal is do you like putting 5v voltage to ecu or taking it away just gonna wire in the engine bay so I can start her up


Jimbobs Lexus IS200 Turbo! - Sparkystav - 24-02-2021

No idea mate, sorry