![]() |
|
Lexus IS200 Turbo - Adding a personal touch - Printable Version +- JapCarForum (https://www.japcarforum.com) +-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11) +--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156) +--- Thread: Lexus IS200 Turbo - Adding a personal touch (/showthread.php?tid=8142) |
Lexus IS200 Turbo - Adding a personal touch - dimis - 20-08-2019 mattross1313 Dimis - I went for these ones in the end, cheap enough, even after delivery charges Thanks for the link mate Lexus IS200 Turbo - Adding a personal touch - mattross1313 - 21-08-2019 OK, mechanical question ![]() I want to remove the recirc/BOV from the car. I've been told its easy enough to do. I assume there will be a pipe either side of the turbo with some gubbins attached? Once I remove these I will look to get get some plates fab'ed up to seal the deal. Has anyone done anything like this before? is that usually all that needs doing, or are there wires/ other stuff to concern myself over Matt
Lexus IS200 Turbo - Adding a personal touch - Dark Samurai - 21-08-2019 What BOV is it mate? Lexus IS200 Turbo - Adding a personal touch - mattross1313 - 21-08-2019 couldn't tell you Oli. I don't think its a branded one as its part of the re-circ setup, not a dedicated BOV.......(I think). Lexus IS200 Turbo - Adding a personal touch - Dark Samurai - 21-08-2019 Could you get us a pic mate? Lexus IS200 Turbo - Adding a personal touch - Phil01 - 21-08-2019 why would you wanna remove the recirc/bov mate and blank it off?? Lexus IS200 Turbo - Adding a personal touch - Dark Samurai - 21-08-2019 I agree? Lexus IS200 Turbo - Adding a personal touch - mattross1313 - 21-08-2019 For one reason.....the sound! Beats any BOV in my opinion. http://www.youtube.com/watch?v=8g89Utv1BXc Lexus IS200 Turbo - Adding a personal touch - Sparkystav - 21-08-2019 what the sound of your turbo crying as its forced to stall instantly? I wouldnt do it mate keep the BOV, its not good for the turbo Lexus IS200 Turbo - Adding a personal touch - Sparkystav - 21-08-2019 the sound is the turbo chopping the air thats being pushed through it backwards, that effectively stalls the turbo, not good for the bearings |