JapCarForum
Little write up on the evolution of my car - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Little write up on the evolution of my car (/showthread.php?tid=645)



Little write up on the evolution of my car - Moley - 24-12-2019

What no close up pics of the welding Confusedhock: It was only sent in the post on Friday !!

Stav could you explain to me what the valve dose ? just because my mate has a scooby and is interested to know what will the effect be with the valve fitted and also what kind it is etc etc .


Little write up on the evolution of my car - Mr Rae - 24-12-2019

Is this going to be done by RSCS and are you going? I hope so, looking forward to having a detailed nosey at the beast lol


Little write up on the evolution of my car - Sparkystav - 24-12-2019

Mr Rae Is this going to be done by RSCS and are you going? I hope so, looking forward to having a detailed nosey at the beast lol

Yes mate it should be all ready before then.
Thanks for the comment.


Little write up on the evolution of my car - Sparkystav - 24-12-2019

Moley What no close up pics of the welding Confusedhock: It was only sent in the post on Friday !!

Stav could you explain to me what the valve dose ? just because my mate has a scooby and is interested to know what will the effect be with the valve fitted and also what kind it is etc etc .

Sorry mate. Will get some lol.

As for the valve it's an apexi exhaust valve. Basically it quietens the exhaust down. You have a small lever in the car and when you pull it it shuts the valve. You lose power whilst it's shut, buy it shuts e exhaust up for motorway driving etc.
Then when you want the power flip the switch open the exhaust back up and away you go.


Little write up on the evolution of my car - Mr Rae - 24-12-2019

Awsome, well its looking mega so far, looking forward to seeing it finished Smile


Little write up on the evolution of my car - Moley - 24-12-2019

Ok cheers Stav , how easy is it to wire up , ie is there electronics involved in this LOL


Little write up on the evolution of my car - Sparkystav - 24-12-2019

No no electronics mate, it's got a wire like a throttle cable. So you just need to feed it through from the cabin to the exhaust.

You can get electric ones too but I'm not sure I'd trust them. But that's just me.


Little write up on the evolution of my car - Moley - 24-12-2019

perfect, I think he might be interested in getting this done also


Little write up on the evolution of my car - FirebirdPhil - 25-12-2019

Sparkystav You can get electric ones too but I'm not sure I'd trust them. But that's just me.

Will let you know I have just welded my electronic one in. The noise difference is great and throttle is slightly more responsive.

The local garage wouldn't do it (as it makes the car technically illegal when valve open) - but let me use their life and welding kit.


Little write up on the evolution of my car - Sparkystav - 25-12-2019

Did you weld yours inline or on a y piece? Would interested to see how they cope long term with the heat. That's my main concern with the electric ones.