+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Little write up on the evolution of my car (/showthread.php?tid=645)
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
Little write up on the evolution of my car - sprinter2012 - 13-01-2020
Sparkystav Yeah at the edge of the tape, right I'll have to get on with that then lol
Shouldn't take too long as there won't be much material to sand off at the edge? Custom work like that can be frustrating sometimes, the carbon centre bar on my bumper has taken a week longer than I intended because of unplanned issues. :Shooting:
Little write up on the evolution of my car - Sparkystav - 13-01-2020
Lol and I've not even started fitting the drivers side one.
Little write up on the evolution of my car - Chris0121 - 13-01-2020
Custom = hard work but that's what we do to be different gotta love it though knowing that your going to go to a show and no other cars will be like yours and when people appreciate the work you put in its nice and well worth it
Little write up on the evolution of my car - Stoney - 13-01-2020
Chris0121 Custom = hard work but that's what we do to be different gotta love it though knowing that your going to go to a show and no other cars will be like yours and when people appreciate the work you put in its nice and well worth it
There is already no other car like Stav's!
Sent from my GT-I9100 using Tapatalk
Little write up on the evolution of my car - Chris0121 - 13-01-2020
True it is amazing still never seen it in person yet, looking forward to though same with a few of the outlaws
Little write up on the evolution of my car - Sparkystav - 13-01-2020
Thanks lads. It's comments like that that make it all worth it.
Little write up on the evolution of my car - is300_dino - 14-01-2020
yeah keep it up mate, dont forget how to do it and can you do mine next please :tongue_smilie:
Little write up on the evolution of my car - Sparkystav - 14-01-2020
Lol too much to still do on mine
Little write up on the evolution of my car - Sparkystav - 16-01-2020
Bit more work today (albeit with a massive hangover)
Fitted the return fuel line into the tank, and also fitted the line right under the car, securing it with P clamps
Also fitted the CO2 line along the car on the outside instead of under the carpet like it was.
![[Image: dce014a5.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/rebuild/dce014a5.jpg)
![[Image: a132fc43.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/rebuild/a132fc43.jpg)
I nearly fell out with the rivet gun lol but got there in the end.
Also wrapped some of the injector wires and igniter wires ready to connect that up to the loom.
Also found a spot to mount my water injection pump to as well.
I was going to mount it in the passenger side gap where the jack normally is, but it just didn't seem to fit snugly like jimxms did. When I was under the car today I noticed a plastic cover opposite side to the exhaust back box.
When I took it off there's a perfect gap for the pump to go into so mounting it there is tomorrows first job.
Here's a pic of the gap.
![[Image: c0244c40.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/rebuild/c0244c40.jpg)
Hopefully finish all the work under the car tomorrow so I can put it down from the axle stands and turn it around to begin the body work on the other side.
Little write up on the evolution of my car - Sparkystav - 19-01-2020
More work:
Last night I put the wheels back on the car and the drivers side wing, then took it down from the axle stands, ready for today.
First job was to enrol the brother in laws help to push the car out the garage, Right down the drive, into the road, then spin it round and push it all the way back into the garage. This is so I can start work on the other arch and also start the work on the boot built/flip flop boot etc.
Also fitted New splitters on the front of the bumper, not sure on them yet, what do people think?
![[Image: 5c950015.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/rebuild/5c950015.jpg)
![[Image: f1be7b1d.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/rebuild/f1be7b1d.jpg)
![[Image: 8ae75d26.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/rebuild/8ae75d26.jpg)
As i can now easily access the drivers side ive taken the steering wheel off and had a look at the electrics to fit the new dash, also fitted the speed view system:
![[Image: 07ce6b70.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/rebuild/07ce6b70.jpg)
![[Image: a8205d36.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/rebuild/a8205d36.jpg)
Will also have some goodies for sale later when I put a thread together.