+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Supercharged Lexus IS200 SE (/showthread.php?tid=4628)
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
Supercharged Lexus IS200 SE - Lexuspat - 12-07-2022
Its mounted on a silicone T pipe similar to what u would use for a BOV, but has a custom mount plate that reduces the diameter down to 25mm. Thats it really mate.
Sent from my GT-I9505 using Tapatalk
Supercharged Lexus IS200 SE - Xtremist - 12-07-2022
And where does your vacuum hose come from
Supercharged Lexus IS200 SE - Lexuspat - 12-07-2022
From the only vacuum point on the car under the throttle body,
Theres a line that comes out from the side, u need to T into that and run it to the bypass
Sent from my GT-I9505 using Tapatalk
Supercharged Lexus IS200 SE - posty - 12-07-2022
And you need tiny hands to get to it!
Sent from my iPad using Tapatalk
Supercharged Lexus IS200 SE - Lexuspat - 12-07-2022
![[Image: 20140712_135949_zps1wopuriu.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/20140712_135949_zps1wopuriu.jpg)
This is the only pic I have on my phone of the bypass
Sent from my GT-I9505 using Tapatalk
Supercharged Lexus IS200 SE - ZAIS200 - 12-07-2022
I've been wanting to see how the bypass fits my next question would be about this clutch that everybody talks about, i'm intrigued to see how this clutch is wired up i'm assuming one wire goes to ignition (as in your case pat) and one to ground as chassis or body, am i correct?
P.s: where or how did you get the 2" pipe fitting for the bypass, the bypasses i've seen on fleabay don't come with them.
Supercharged Lexus IS200 SE - Lexuspat - 13-07-2022
The pipe for the bypass was made by Fossil Fuels,
All it is is a flat plate with a hole in the middle and then a small length of metal pipe off the one side to attach it.
With regards the clutch Neg runs to the Neg of battery and the Pos rusns to an ignition source in the car, I used the cig lighter
Sent from my GT-I9505 using Tapatalk
Supercharged Lexus IS200 SE - Lexuspat - 13-07-2022
![[Image: received_m_mid_1396456469237_6201bd34981...baajq.jpeg]](http://i1227.photobucket.com/albums/ee440/davis5835/received_m_mid_1396456469237_6201bd34981b47e161_0_zpsodybaajq.jpeg)
Heres a pic of the mount for the bypass
Sent from my GT-I9505 using Tapatalk
Supercharged Lexus IS200 SE - Xtremist - 13-07-2022
Ah Ok that looks pretty simple to make
Supercharged Lexus IS200 SE - Shack - 13-07-2022
Hey Pat, thanks for the help before. This is an awesome build! loving all the information here mate! Keep us posted with heaps more mods =D