+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: My IS200 build (/showthread.php?tid=12457)
My IS200 build - IS200Boosted - 25-07-2023
Tnx mate! Yes they for sure are hard to collect these days!
Seems like aiming for ARGO rods and machined stock pistons.
End of hijacking your thread// Richard
My IS200 build - Sparkystav - 25-07-2023
Argo rods? Got a link mate?
My IS200 build - IS200Boosted - 26-07-2023
Sure! Here it is: http://www.argorace.com.au
They dont stock 1g rods but make them as they are requested!
// Richard
My IS200 build - is200turbo - 26-07-2023
Looks good mate have you found somewhere for the Pistons?
Sent from my iPhone using Tapatalk
My IS200 build - IS200Boosted - 26-07-2023
Nope i havent yet,
I am wondering if stock pistons can be used for 300 hp if the static compressin ratio is lowered a bit by machining down pistons height half a millimeter or like that.
Otherwise i have to use 1g-gte ones..
// Richard
My IS200 build - is200turbo - 26-07-2023
Je pistons will make custom if you can get the dimensions of the 1g-gte
Sent from my iPhone using Tapatalk
My IS200 build - IS200Boosted - 26-07-2023
Ok!
thanks for sharing this!
I should take this in consideration when its time for a overhaul
!// Richard
My IS200 build - is200turbo - 26-07-2023
Have a look at these.
http://www.ikengineering.co.uk/#!product/prd1/4236996221/lexus-toyota-is200-1gfe-piston-rod-kit
Sent from my iPhone using Tapatalk