+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: my is200 se (/showthread.php?tid=9123)
my is200 se - davidjamesbattersby - 24-11-2019
fitted my pipercross viper inductionkit today, what a hassle, had to go from 86-76 then a reducer from 76-63 but just need to get the cold air feed now but will fit the air duct in to the bumper im getting from demon
![[Image: ab396194.jpg]](http://i1231.photobucket.com/albums/ee508/davidjamesbattersby/ab396194.jpg)
my is200 se - Lexuspat - 24-11-2019
That's a huge inlet pipe, I ran the cold air feed from next to the foglight on the drivers side just for an idea
my is200 se - davidjamesbattersby - 24-11-2019
what from the gap next to the fog the air feed cover is 100mm feed lol
my is200 se - Lexuspat - 24-11-2019
Yep that's the place granted mine just sits behind it as its large but its a straight feed from the front of the car
my is200 se - davidjamesbattersby - 24-11-2019
think thats where im going to feed mine from, is there room to run the pipe up to the filter housing mate
my is200 se - Lexuspat - 24-11-2019
I cut a hole in the top to feed it through Granted prob not the best idea but there's no sharp edges or damage just a perfect hole sealed around the edges with the feed coming up and out of it
my is200 se - Lexuspat - 24-11-2019
And as that section is hidden behind the arch lining I didn't see a problem running up through there as its just a flat piece of metal
my is200 se - davidjamesbattersby - 24-11-2019
Do you mean on the inner wing
my is200 se - davidjamesbattersby - 24-11-2019
You got any pics.
my is200 se - Lexuspat - 24-11-2019
There is a flat empty space behine your drivers side headlight that's the area I went through, I'm at work so don't have the pics with me