McLevin's Levin - Printable Version

McLevin's Levin - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: McLevin's Levin (/showthread.php?tid=9810)

Pages: 1 2 3 4 5 6 7 8 9 10

McLevin's Levin - McLevin - 19-04-2022

Here's a video of how the trumpets sound. They sound savage under load. Will get a vid of that at some point in the next week.

http://vimeo.com/96994954

McLevin's Levin - el_bandido - 26-04-2022

Sounds sweet mate.

McLevin's Levin - el_bandido - 01-11-2022

Any news on this car?

McLevin's Levin - McLevin - 01-11-2022

I've done a bit of work to it, a few little changes. Tongue

McLevin's Levin - McLevin - 01-11-2022

So not much has happened since my last update.

Picked up a new O2 sensor.

Out with the old one.

The old one looks like it had seen better days.

And in with the new.

I also changed the discs and pads on the rear. Unfortunately the thicker pads meant that my sticking calliper was a lot more noticeable. Sad

So i ended up taking both rear callipers off and sending them to these guys http://www.brake-caliper-painting.com/ to be refurbished. I realised my mistake almost immediately. I had forgotten that i was driving to Silverstone the next week for the British Grand Prix. After a frantic phone call i was assured they'd be finished and back to me in time. Four days later I had heard nothing, another phonecall, "Oh we need to order new pistons, you'll have to pay extra." I was quoted for a full refurbishment including all seals and pistons, turns out that wasn't the case apparently. So begrudgingly i paid up still hoping to have my callipers back in time, they said they'd call me the next day when the pistons came in and they finished the rebuild. Waited a day, guess what no phone call. I call them, get some excuse, the pistons had arrived but they hadn't done anything. Turns out i wasn't getting them back in time for the Grand Prix.

So i ended up hiring a car for the Grand Prix Weekend. Which was awesome by the way, the Grand Prix, not the hire car. >.<

My callipers did arrive back a week later. So twice as long as they said they would take, and to make matter worse the slider pin was still seized. So i ended up taking it apart myself and fixing it. They did at least look good though.

All fitted up. Excuse my rusty discs, the car had been sat for a while.

So yeah if you are ever tempted to get your callipers refurbed i would not recommend that company, they don't seem to care unless your car is a supercar. They promise photos of your callipers during the whole process showing the work they've done but i never saw any of that. Total lack of communication, i was constantly chasing them up. I opted out of 20% discount on the promise that they would get them back to me in time for the Grand Prix which they did not deliver on. Went I did email them after i got the callipers back highlighting the issues, the emails went unanswered.

Car went in for its MOT after this which it failed for a split in the boot of the front drivers drop link. A quick £10 fix fortunately and it passed the next day.

Here's a few pics of the car as it currently stands.

[Image: CA9E1695-D794-4FED-8BA1-2DE1F696D279_zpsgttr9dgo.jpg]

[Image: D8C2C58F-36C5-4D2B-984D-4BB913191267_zpsuj5b716o.jpg]

Oh and the car reached 150000miles. I missed the pic by a mile.

[Image: 77B2AB45-D6A9-45C2-AE20-4C46F1575B98_zpstifv9tax.jpg]

Next month i'll be getting a Whiteline Rear Anti Roll bar to replace my stock one and then hopefully a set of 16x8 Enkei RPF1's.

McLevin's Levin - McLevin - 01-11-2022

Forgot I had added HID's to the Levin as well. They were easy enough to fit but I found they didn't sit right on their own so I ended up modifying the old bulb plug to make them sit properly.

[Image: 5BB7CF40-A978-419A-BE39-8F75D049FB38_zpsy6llfs7n.jpg]

[Image: D7B2DEE0-69AE-4986-948F-7AA463A731F9_zpserer0jla.jpg]

By chopping the ends of the old bulb plug I was able to fit that the the rear or the HiD Bulb making it seat correctly inside the headlight.

[Image: 52215D66-C31C-47E4-8C82-0D653FBDC09C_zpsqkdomwq6.jpg]

All fitted up. I need to get a new bulb for my full beams now.

[Image: 87C8C576-739B-4914-9A6D-B84A4D78CAE7_zpsbdhpjwlg.jpg]

Also took out the seats and deep cleaned the inside of the car.

[Image: 0063DF22-D301-4049-B689-3DAEB2787EF2_zpsvf7dtptc.jpg]

Oh and I made it on to the Japfest Gallery. Shame it's not that great a pic.

[Image: EDC9B1A1-44D8-4FDB-96BA-4F5A71980A8A_zpsxpnv96gq.jpg]

McLevin's Levin - McLevin - 01-11-2022

So a little update. I got my hands on an ARC Intake Chamber, it was in need of a tidy up.

[Image: 7BA41F7C-D48E-42A7-BD31-CB31BADF72BE_zps6xa3ayc6.jpg]

So I gave it a bit of a polish.

[Image: 64FC2DAE-0369-4190-9892-E31E61C7473C_zpsv89wiyxo.jpg]

[Image: 422E52D3-35AC-418A-9BBA-72AFEFAD948D_zpsxiqaezmc.jpg]

New decal is on the way. A before and after shot.

[Image: 7EE66EF1-2188-41F9-A7C6-94332B607C7E_zpsb17bdafz.jpg]

Decided to get rid of my carbon fibre Cold Air Intake and get a HKS Panel Filter for the stock airbox.

[Image: D5C5E8BE-C052-47DB-8264-4ECDD1B0A989_zpszkjfkxgg.jpg]

Got it all fitted up the other day.

[Image: 22F999BD-691B-4FBB-BDB0-301BBB06B71B_zpsaxfmifyh.jpg]

[Image: 1B1EF2A8-F818-439E-94E6-606612C6F26C_zps17gizkqy.jpg]

I was honestly surprised with the difference the ARC Intake Chamber made. Throttle is a lot more responsive now and noticeable mid range torque increase. My intake noise has changed as well in a good way.

McLevin's Levin - McLevin - 01-11-2022

Quick update. After being driven mad by a knock coming from the rear of the car i finally bit the bullet and bought a new rear sway bar. Ended up getting a Whiteline one along with some new droplinks also Whiteline.

[Image: F51927E7-1FFE-4BFA-9C96-BC0DF7840523_zpsefnb6iyl.jpg]

[Image: E49E9579-46E0-4875-9DDD-96C7646F2637_zpsloylcpwb.jpg]

Fitting it was easy enough even though it took a bit longer than expected.

Removed the old droplinks.

[Image: 570B22D6-B657-4823-8EC0-6662EF3DA9F2_zpskowirule.jpg]

Undid the bushes and brackets.

[Image: 38F35379-3295-4FEA-9479-078A451969B7_zpsadbuelxd.jpg]

Loosened off and removed the fuel filler hose.

[Image: 37234626-C8C0-417D-BE58-C44B5F6E5D7E_zpsqcmqjqnv.jpg]

[Image: A636EE50-A458-403F-A45F-0B44960A6C46_zpsfbgzexiz.jpg]

Same with the breather line. Then i had to loosen off the fuel tank straps.

[Image: F0B201BB-677C-4F5E-89B9-6C2CF0A0B9DB_zpsmdntjfdi.jpg]

Then it was just a case of dropping out the old sway bar with a bit of wiggling.

I wonder where that knocking was coming from? >.<

[Image: th_9C6473B9-79F0-44BA-AF7E-E94E00FCB4BB_zpsfcw665cw.mp4]

Anyway out with the old and in with the new.

[Image: 47E77CB6-8B18-47E3-AF5B-F308F102FA0A_zpsqp4uubpm.jpg]

[Image: AA6AE8E2-BC0D-457F-8B1B-16BD5A7AB3AB_zpsviuxhugd.jpg]

All fitted with the new droplinks.

[Image: 1A758E9E-F97C-485B-952E-806441F0C25F_zpss2t5stsb.jpg]

[Image: 04E7CFCD-17CF-41FE-BEF8-4CF92BD8F8FF_zpsqozvpnu1.jpg]

[Image: DA037EAD-FBF8-414A-B02F-9FA9131745B8_zpsx2tt8iac.jpg]

Unfortunately i managed to ****** one of the fuel tank strap bolts in the process, luckily a new bolt was only £1.60 from Toyota.

[Image: E94DD697-1541-4215-A375-548428DADF93_zpso7nq6yyf.jpg]

The new sway bar has made a huge difference to the handling of the car, its a lot more planted in corners now. I guess that shouldn't be a surprise considering how shagged the old one was. Oh and no more knocking!

McLevin's Levin - McLevin - 01-11-2022

I guess this could be considered a big update. I've been planning on getting new wheels for a while. Had my heart set on a set of Enkei RPF1's, after uhmming and ahhing about wether I should get 16x7 or 16x8 for a while things just sorta fell in to place and I ended up purchasing a set.

[Image: 70C6694F-0D2A-4987-BABA-1F1B2707D7F5_zpsmxde142f.jpg]

[Image: 7DC6D869-5BAE-414A-9C2A-E0CF3FAE50C1_zpswre4wbs3.jpg]

I ended up going with my gut and getting the 16x8's in F1 Silver. I had originally planned to get them sprayed Matte Bronze like my current wheels, but after seeing them in person I changed my mind.

Had to have a quick test fit to make sure they didn't foul anything.

[Image: 9A83FFB6-3B35-490C-9368-7B50B1DE0900_zps7nqxd00e.jpg]

[Image: 551E28E7-F3EC-4AA7-AEDC-00D6A618760A_zpshjawncce.jpg]

[Image: 545983CE-EBBC-4903-A668-BF0581BA3323_zps3mjuwybv.jpg]

[Image: FEF01A7F-1279-4976-9579-EC5E261E2DF2_zpsumf0kwqf.jpg]

Everything fit perfectly in the rear with room to play with.

[Image: D374E67B-C8F2-4CC5-AA5D-0517DB290B8A_zpsgtfrc5st.jpg]

[Image: A7C77009-C83D-4034-8085-0A36E2BF8BE4_zps280whrip.jpg]

[Image: 21DC1BF4-9E18-481D-B202-9C9439F7A117_zpscbjtclyh.jpg]

[Image: 6A4BCC28-C595-49C0-A764-59A487DCEB73_zpsawtzz4ud.jpg]

Even more room to play with up front. Now i just need to get some rubber on them.

Picked up some Auto Finesse Wheel Cleaning and Waxing products to protect the wheels before i put them on. If you haven't tried their products before i recommend that you do because they are awesome.

[Image: 9542731A-699E-4D0C-9743-43268F70571A_zpserwlkcab.jpg]

McLevin's Levin - McLevin - 01-11-2022

Got they tyres fitted today, went with 205/45/16 Toyo T1R's, tiny bit of stretch just to stop them scrubbing.

[Image: 1E120531-73CD-42FE-B78F-84FF72B90A78_zpstqc3k4l1.jpg]

[Image: 5954624D-449D-470F-9774-2E1BE35473A4_zpsek7mtxjm.jpg]

[Image: D8B4102F-EDB0-4791-9412-642A0B4327FE_zpsgzfh3h69.jpg]

Few quick pics of them on the car. Will get some decent shots after i have given the car a clean.

[Image: 0CCA0296-9747-4B72-B1BA-77C50D50A2CD_zps8olwvpd9.jpg]

[Image: C711BFBE-802B-46CB-9A40-0B2E266D633C_zpsialq2ycf.jpg]

[Image: 83AEAEF3-0064-4892-983A-DBE0C0F0D0B2_zpsmfrw4fq8.jpg]

Really happy with how they look on the car. Might add a small spacer to push out the front a little bit more though.