JapCarForum
Little write up on the evolution of my car - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Little write up on the evolution of my car (/showthread.php?tid=645)



Little write up on the evolution of my car - is300_dino - 08-03-2020

what you should of done stav was to set up a time laps video from start to finish!


Little write up on the evolution of my car - Sparkystav - 08-03-2020

Lol that would have been fun!

A couple of pics:

[Image: a8877cef.jpg]
[Image: 168018bc.jpg]
[Image: d9f4307d.jpg]


The part itself!


And the gap I now have since removing the aircon radiator, loads of cooling

[Image: f8d4b0a7.jpg]


Little write up on the evolution of my car - toxo - 08-03-2020

That adaptor looks the nuts!!


Little write up on the evolution of my car - Sparkystav - 08-03-2020

And a few more from tonight:

[Image: 0647f2df.jpg]
[Image: 5d0a3750.jpg]
[Image: 7c25282a.jpg]
[Image: e2b28033.jpg]


Little write up on the evolution of my car - sprinter2012 - 08-03-2020

The adapter looks great, looks like Hurricane did a great job on the machining!

Which of the designs did he use in the end? The straight hole version or the one that opens the holes up to full size on each side with diagonal ports?


Little write up on the evolution of my car - Moley - 08-03-2020

That dose look like some great work done they by Pete .Also its looking like a car again. You must be getting a bit excited now !!


Little write up on the evolution of my car - Sparkystav - 08-03-2020

sprinter2012 The adapter looks great, looks like Hurricane did a great job on the machining!

Which of the designs did he use in the end? The straight hole version or the one that opens the holes up to full size on each side with diagonal ports?

The full thing mate, angled ports the lot, it really is a work of art


Little write up on the evolution of my car - Lexuspat - 09-03-2020

great stuff stav i cant wait to see this at the RSCS


Little write up on the evolution of my car - Sparkystav - 13-03-2020

Looks nearly there now!

[Image: 657f1518.jpg]
[Image: be34609a.jpg]
[Image: 33aff12c.jpg]
[Image: a814f9bb.jpg]

Ignore the crappy pipe on the inlet side, thats temp till I get the proper one back from Moley with the bov flange welded on.

As you can see she's nearly there, even turned her over today. No start though Sad. Upon investigation I'm getting no fuel pressure so after a little head scratching I figured out I hadnt done the return fuel line mod quite right.
So sorted that out and should be ready to fire up tomorrow.

Thankfully though no huge leaks sprang, though I *may* have a leak from the radiator. But luckily I have a spare.

Also finished the wiring on the interior and boot so put the seats back in and steering wheel on. Feels close now!
And last job tonight was masking up the scratched areas of the engine bay and giving them a quick coat of paint.

Also booked it in for mapping on Saturday 5th!


Little write up on the evolution of my car - Dan_Turism0 - 13-03-2020

oh hello precision turbo?