+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Jimbobs Lexus IS200 Turbo! (/showthread.php?tid=7339)
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
Jimbobs Lexus IS200 Turbo! - john wan - 02-04-2021
Why did u change them? Can you not set everything low cause there is loads of sc is200 s that are running on standard injectors then build up from there? If its still happening then surely its somthing else?
Jimbobs Lexus IS200 Turbo! - Sparkystav - 02-04-2021
I'd remove the injector maps completely mate the only map you need active is the fuel cut at 4.34v IMHO.
Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 02-04-2021
Ok mate will do could it be that still at 0.4 too much air for the injectors
Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 02-04-2021
right idea im thinking i may have a open circuit in the WOT with the tps or aps as this only happens a WOT could be that when i shorts the 2 pins its not getting the WOT signal and cutting everything
Ill check tomorrow ****** hard this as its chucking no codes at me aaarrrgggghhhh lol
Jimbobs Lexus IS200 Turbo! - Sparkystav - 02-04-2021
May sound silly but have you recalibrated rated the throttle voltages?
Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 02-04-2021
What on the old throttle body?? Or in the greddy??
I checked the voltage before on the tps and aps before but only the 0.8v at idle so they were in tolerance but didn't check at wot so this could be it!
Jimbobs Lexus IS200 Turbo! - Sparkystav - 02-04-2021
On the greddy, you can cal the throttle voltages cant you
Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 02-04-2021
Yeah mate but the standard ecu not gonna like it lol
Jimbobs Lexus IS200 Turbo! - Sparkystav - 02-04-2021
What do you mean? It's just a measurement the greddy takes, a reference. You just go to the thottle tab on the setup with the engine off and then it measures the voltage at closed and fully open.
Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 02-04-2021
Yeah I can get measurements from there but you can also set up manually in the greddy oh I see what you saying mate it just sets parameters for the greddy it's been a long day lol
I beginning to think its todo with throttle body oem one as after it does stall I have to take key out of ignition lock and unlock and it will restart otherwise it won't restart