![]() |
|
Is 200 track car!!! - Printable Version +- JapCarForum (https://www.japcarforum.com) +-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11) +--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156) +--- Thread: Is 200 track car!!! (/showthread.php?tid=13843) |
Is 200 track car!!! - Jimbob-T-Lex - 31-12-2023 great progress mate!! good interesting read. Impressed with your work look forward to seeing it all bolted on! Is 200 track car!!! - Malbrow - 28-11-2024 Well here's a little update on the worlds slowest project, i blame having kids and a wife. but the engine is finally in with the gearbox attached but this doesnt come without its own problems. With the engine in place the gearbox is touching the roof of the gearbox tunnel and if i drop the engine down it sits on the steering rack great!!! i will have to make some more mounts so the engine sits higher and point the gearbox on an angle. i will still have to adjust the tunnel but hopefully the prop angle will not be as much. Engine going in,
Is 200 track car!!! - Malbrow - 28-11-2024 My beautiful engine stand
Is 200 track car!!! - Malbrow - 28-11-2024 This is where it was tight on the steering rack
Is 200 track car!!! - Malbrow - 28-11-2024 Iv also had to do some minor adjustments to the tunnel started with a small window
Is 200 track car!!! - Malbrow - 28-11-2024 Ended up like this
Is 200 track car!!! - Sparkystav - 28-11-2024 What's hitting the rack? The sump or the block itself? Sent from my iPad using Tapatalk Is 200 track car!!! - Malbrow - 29-11-2024 The bottom of the engine iv picked gearbox up to clear it that's why iv stated to modify the tunnel but don't know if angle is too much for prop. Is 200 track car!!! - Malbrow - 20-12-2024 Iv managed to pick the engine up enough to give good clearance and means the prop will not be on an angle ![]() Sent from my iPhone using Tapatalk Is 200 track car!!! - Sparkystav - 21-12-2024 ghetto! |