+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Supercharged Lexus IS200 SE (/showthread.php?tid=4628)
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
Supercharged Lexus IS200 SE - Rabster - 16-11-2022
did he get his hands dirty lol
Supercharged Lexus IS200 SE - jeorje_2000 - 23-11-2022
Lexuspat Well the last few days the charger has not felt as it should, so bonnet up and had a hunt, found an air leak between the outlet pipe and charger.Hello,
So last night the kit came out and a liquid gasket was put in place. All sorted and running sweet again.
And today i temporary fitted the boost gauge in the centre consol until i order a pillar mount
Sent from my GT-I9505 using Tapatalk
what presure do you have with the standard pulley on the gauge?
Supercharged Lexus IS200 SE - jeorje_2000 - 23-11-2022
Lexuspat Its mounted on a silicone T pipe similar to what u would use for a BOV, but has a custom mount plate that reduces the diameter down to 25mm. Thats it really mate.
Sent from my GT-I9505 using Tapatalk
What is the actual diameter of the bypass valve?
Supercharged Lexus IS200 SE - Lexuspat - 23-11-2022
Outlet side is 40mm
Sent from my K017 using Tapatalk
Supercharged Lexus IS200 SE - Lexuspat - 23-11-2022
By what it reads I produce between .4 and .5 of boost
Sent from my K017 using Tapatalk
Supercharged Lexus IS200 SE - jeorje_2000 - 26-11-2022
Lexuspat By what it reads I produce between .4 and .5 of boost
Sent from my K017 using Tapatalk
with the stock pulley should be max 0,35, mine it is 0,35 and almost 0,4 after 160 km/h because a have kept the original cold air intake but the accelerations it is good View My Video
If you have 0,5 you should run even better you have a movie?
Supercharged Lexus IS200 SE - Lexuspat - 27-11-2022
I don't have a good film but will try and get one done soon. I would say being realistic and the type of gauge I have 0.4 is where it is she pulls very well for a custom made kit
Sent from my K017 using Tapatalk
Supercharged Lexus IS200 SE - Lexuspat - 29-11-2022
Finally ive managed to get hold of yellow vac lines so will start getting the bay looking a little nicer for show season
Sent from my GT-I9505 using Tapatalk
Supercharged Lexus IS200 SE - Rabster - 29-11-2022
all the small bits
Supercharged Lexus IS200 SE - Lexuspat - 29-11-2022
That's it at JAE is only just finished it off so wasn't looking great. Hopefully when I finish it will look a lot nicer
Sent from my K017 using Tapatalk