JapCarForum
What have you done to your car today? - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: General Car Maintenance (https://www.japcarforum.com/forumdisplay.php?fid=150)
+--- Thread: What have you done to your car today? (/showthread.php?tid=11292)



What have you done to your car today? - reganlives - 01-03-2022

Well done mate! That's a great price!
I got the oil changed on the lex and on the yaris today. When we get our house then I'll service both cars myself but at the moment just get the bits myself and get my mechanic to deal with it lol. Living in an apartment ain't great when you have two cars! At least I still have use of my parents garage and drive though! Smile

Sent from my JY-G3 using Tapatalk 2


What have you done to your car today? - el_bandido - 04-03-2022

Changed my spark plugs and master cylinder. Turned out I had a replacement master cylinder from either a 2001+ IS200 or possibly a GS300, the fittings were different on one of the brake lines so I had to sort out a custom solution. Copper pipe for the win:

Bench bleeding the new cylinder:
[Image: zy96fKW.jpg]

Old one off:
[Image: 7miQif7.jpg]

[Image: 7EHLBty.jpg]

New one on:
[Image: hVewt1J.jpg]
[Image: ejeawOc.jpg]
[Image: BCBUQui.jpg]

Took a while to bleed the whole system to the point where there was no air, but my brakes are actually working again now. I think I've got a small air lock in the ABS block, but I can't bleed that without some kind of pump/vacuum.


What have you done to your car today? - Phil01 - 04-03-2022

el_bandido Changed my spark plugs and master cylinder. Turned out I had a replacement master cylinder from either a 2001+ IS200 or possibly a GS300, the fittings were different on one of the brake lines so I had to sort out a custom solution. Copper pipe for the win:

Bench bleeding the new cylinder:
[Image: zy96fKW.jpg]

Old one off:
[Image: 7miQif7.jpg]

[Image: 7EHLBty.jpg]

New one on:
[Image: hVewt1J.jpg]
[Image: ejeawOc.jpg]
[Image: BCBUQui.jpg]

Took a while to bleed the whole system to the point where there was no air, but my brakes are actually working again now. I think I've got a small air lock in the ABS block, but I can't bleed that without some kind of pump/vacuum.

Good Job you have done there


What have you done to your car today? - el_bandido - 04-03-2022

Made a bit of a mess with the brake fluid, but it wasn't that hard to clean up.

Was handy having access to my dad's garage!


What have you done to your car today? - Jspec Andy - 04-03-2022

put some 5.1 brake fluid in ready for japfest


What have you done to your car today? - Sparkystav - 07-03-2022

Decided I hate 'tuner nuts' after one split.
Then the drill bit snapped in when I tried drilling out the stud.

So spent this afternoon. Removing the whole rear hub so I can get the wheel off from the back as it's cheaper to buy a hub than a 10" wide 19" wheel!

Ball joints and the various suspension parts do not want to come off with the wheel still on! Thankfully a hammer and a hi torque impact wrench came to the rescue!


What have you done to your car today? - el_bandido - 07-03-2022

We had to angle grind the wheel off my hub haha. Pain in the **** isn't it?


What have you done to your car today? - Sparkystav - 07-03-2022

No way am I damaging the wheel!


What have you done to your car today? - Chri5 - 21-03-2022

Fitted a very loud exhaust system Wink thankfully it's got a bung lol


What have you done to your car today? - is200turbo - 21-03-2022

What exhaust have you got?


Sent from my iPhone using Tapatalk