+- JapCarForum (https://www.japcarforum.com)
+-- Forum: General Discussions (https://www.japcarforum.com/forumdisplay.php?fid=3)
+--- Forum: The JCF Lounge (https://www.japcarforum.com/forumdisplay.php?fid=17)
+--- Thread: A sticky situation (/showthread.php?tid=10344)
A sticky situation - clossie - 19-03-2020
My wheel arch spats have recently become unstuck where they join the body underneath the rear bumper. Whilst they are held on by clips and screws on the inner arches, they are now hanging loose and flapping around round the back. What tape do you guys use on bumpers/external trim etc. bought some double sided 3m stuff but it only lasted until the next wash so want something a bit better(well alot wouldn't go a miss)
![[Image: a5059c62.jpg]](http://i1109.photobucket.com/albums/h437/1clossie1/a5059c62.jpg)
A sticky situation - Sparkystav - 19-03-2020
Pu sealant, comes in a tube like bathroom sealant, sticks anything!
A sticky situation - Mikey - 20-03-2020
when this happend to mine i took them off and sew them with some black garden wire couldnt notice
A sticky situation - TurboPete - 20-03-2020
I would try that double sided tape you can get to fix number plates on. Might be a bit better than normal double sided tape as it'll be a bit thicker/spongier (spelling!?!)
A sticky situation - Rolex - 20-03-2020
Tiger Seal
A sticky situation - Nuttaomen - 20-03-2020
Rolex Tiger Seal
That's the one BUT before u do it mask the area with tape as it gets everywhere
A sticky situation - Lexuspat - 20-03-2020
Agree with Rolex Tiger seal its what body shops stick spoilers on with and is really strong stuff
A sticky situation - Sparkystav - 20-03-2020
Tiger seal = pu sealant.