+- JapCarForum (https://www.japcarforum.com)
+-- Forum: General Discussions (https://www.japcarforum.com/forumdisplay.php?fid=3)
+--- Forum: The JCF Lounge (https://www.japcarforum.com/forumdisplay.php?fid=17)
+--- Thread: Gromits (/showthread.php?tid=12126)
Gromits - Colin G - 26-01-2021
Could somebody please kindly point me in the right direction to which rubber gromits I need to fill the two square holes in my bumper which have been left by removing the standard plate holder and fitting a jap sized one on my IS. I did see a pic of some fitted in another thread but can't remember which thread or whose pic it was.
Thanks
Gromits - Chris0121 - 26-01-2021
If you take off the bumper mate you can get to the back of them and you could fill the holes and just touch them up with paint could easily do them in an hours work
Gromits - jomo - 26-01-2021
I used two square black plastic grommets from my computer desk, they were the blanking end caps, fit nice n tight...
Gromits - Rabster - 26-01-2021
id go with chris's idea then maybe get it blown in when you got some time
