+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: The Z is finally coming together (/showthread.php?tid=12390)
Pages:
1
2
The Z is finally coming together - Mrs HollowPoint - 25-03-2021
Hi all, I've been really busy on our Z. The 'before pics' are on Mr Hollowpoint's (my husbands) Pics of my 300zx thread in this forum.
i have now resprayed nearly all the car with bodykit and other mods that I wanted. The 'floating targas' boot install is also looking a lot better. Of course we both have loads of things on our todo list for the Z, but for now, we are ready for show season and just enjoying our creation for the summer.
![[Image: Drivers-Front-Up.jpg]](http://www.brighter-web.co.uk/images/300bodydone/Drivers-Front-Up.jpg)
![[Image: Drivers-Front.jpg]](http://www.brighter-web.co.uk/images/300bodydone/Drivers-Front.jpg)
![[Image: Fat-****.jpg]](http://www.brighter-web.co.uk/images/300bodydone/Fat-****.jpg)
![[Image: Pass-Front.jpg]](http://www.brighter-web.co.uk/images/300bodydone/Pass-Front.jpg)
![[Image: boot-tidied.jpg]](http://www.brighter-web.co.uk/images/300bodydone/boot-tidied.jpg)
![[Image: uploadfromtaptalk1365960098269.jpg]](http://www.brighter-web.co.uk/images/300bodydone/uploadfromtaptalk1365960098269.jpg)
![[Image: rearbumper.jpg]](http://www.brighter-web.co.uk/images/300bodydone/rearbumper.jpg)
Car: UK Spec 1990 Twin Turbo Targa (Manual)
Engine: VG30-DETT (from an auto)
Wheels: Dare Hiro - 19" staggered
Exterior Mods:
Veilside CII sideskirts moulded/integrated to body
Customized Scarab Front Bumper
Custom Vented bonnet
Customized JDM Spec Bumper with aftermarket splitter (Make/model unknown)
De-Swage lined
99' Spec Spoiler
99' Spec Rear Lights
99' Spec Perspex strip
Tinted rear and rear quarter windows
Crystal Indicators
Clear Side Repeaters
Engine Mods:
Mines ECU
Unknown dual filter induction kit
Mongoose Elbow back exhaust
Braided Fuel Lines
Iridium Plugs
Japspeed Radiator
Greddy Intercoolers
ToFit:
NA power steering pot
Lightweight bottom pulley
Polished Plenum
Painted viscose fan[
Uprated clutch
Suspension:
Meister R Zeta-R Coilovers
Driftworks Front Tension Arms
Driftworks Rear Camber Arms
Driftworks Rear Traction Rods
Driftworks HICAS Lockout kit
Japspeed Front Camber Arms
Japspeed Front and Rear Strut Braces
Braking:
Black Diamond, Standard Sized, Drilled and Grooved Front Discs
EBC, Standard Sized, Drilled and Grooved Rear Discs
EBC Yellow Stuff Front Pads
EBC Green Stuff Rear Pads
Braided Front Brake Hoses
Interior Mods:
Japspeed QuickShift Kit
Momo Racing, Leather & Chrome Steering Wheel
Quick-Release Steering Wheel Boss Kit
Stainless Gear Knob
Customised Center Panel
Painted dial surround
After market hazard switch
Leather Trimmed Door cards and cowling panels
Pod Mods with rear wiper switch delete and Blue LED backlighting
Painted side vents
Painted dash vents
Painted scuttle panels, refurbed wipers
Electrical Mods:
Turbo Timer
Digital Oil Pressure/temp Guage
Digital Water Temp Guage
Digital Boost Guage
Custom ICE install
0 guage amp wiring
Fat Mat sound deadening
LED Clocks
Under-car lighting
6K HIDs
ToDo:
Wire up oil gauges properly
modify and recover interior panels
Completely re-bush and re-furb front and rear subframes
Fit Rear Braided Hoses
Misc Work Done:
Targas stripped and refurbed
Sills chopped out and replaced
Boot Lid replaced / baremetalled
Custom paint throttle cover
painted cam belt covers
Chrome fuse box cover
Engine rebuilt from lower plenum up
Polished Stainless Radiator Bracket
Rear windscreen wiper, washer jet and cockpit switch all deleted
Hicas lockout
The Z is finally coming together - Lexuspat - 25-03-2021
thats amazing, ive always loved these cars
you bringing it to any shows this year
The Z is finally coming together - Sparkystav - 25-03-2021
Lovely looking motor mate, fantastic work
The Z is finally coming together - FirebirdPhil - 25-03-2021
That is PERFECT. Exactly how a 300zx should look.
The Z is finally coming together - Colin G - 25-03-2021
Looks good, I do miss driving mine.
Sent from My Blackberry Via Tapatalk
The Z is finally coming together - HollowPoint - 25-03-2021
We will be at Japfest this coming weekend with the Zclub, then we're hoping to make Japfest2 up here at Donnington park. We are seriously considering coming to JAE with you guys this year, as we missed it out last year altogether. Thanks so much for all the nice comments, as I'm sure you're all too aware, there are plenty out there who will slam something so modified, either out of jealousy, or just because they personally believe cars shouldn't be modified.
The Z is finally coming together - HollowPoint - 25-03-2021
Rose didn't put this one up, but it's my favourite and plenty of others like it too
![[Image: Pass-Side.jpg]](http://www.brighter-web.co.uk/images/300bodydone/Pass-Side.jpg)
The Z is finally coming together - Manpanzee - 25-03-2021
That is amazing. Good job.
The Z is finally coming together - HollowPoint - 09-06-2021
Engine pic to add to the thread, even though it's in another thread already, I just love the pic so much
lol
The Z is finally coming together - sprinter2012 - 09-06-2021
Nothing wrong with showing off your pride and joy mate
It does looks very nice with all the freshly painted parts now it's all back together :thumbup1: