Opinions please - Printable Version +- JapCarForum (https://www.japcarforum.com) +-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11) +--- Forum: Wheels & Tyres (https://www.japcarforum.com/forumdisplay.php?fid=152) +--- Thread: Opinions please (/showthread.php?tid=12465)

Opinions please - Chargespeed - 11-04-2021 I able to get set of 18 x 9.5j Rota GTR's at the right money At the moment they are pink I think they look kinda cool Going put these on my white Altezza Think it will be very different What ye all think Opinions please - sprinter2012 - 11-04-2021 I think you'll need a trip to a bodyshop to get 9.5s to fit on an IS200 properly, but they would look awesome. Opinions please - Chargespeed - 12-04-2021 Was kinda thinkin that yea Prob too big and it pull the balls out of it Opinions please - ZAIS200 - 12-04-2021 Pink is not my favorite colour but like you said its different and Pink does go with white very well, i reckon it'll work...But Like sprinter said though not sure if a 9.5J rim will fit. Opinions please - S - 12-04-2021 What are the offsets? Opinions please - Chargespeed - 12-04-2021 18in x 9.5j et26 I know I will have roll arches but will this be enough Opinions please - is300_dino - 12-04-2021 the backs you should be ok with some rolling, you may need some chargespeed front wings like stavs got to get the fronts in without scraping the inside arch plastics Opinions please - S - 12-04-2021 I've done this for you You'll have 4"s of dish from the mounting face to the outside arch And you'll have 5.5"s of dish from the mounting face to the inside arch, arch liner, suspension You can get a rough idea of fit if, while the car is on the ground, put a tape measure where the wheel meets the mounting face and then see how close 4"s and 5.5"s is to fitting.you'll have to use your imagination a bit too though! My guess is they probably won't fit, my rear is 9"s and et34/38 (i think) and it's very close. Opinions please - Chargespeed - 25-04-2021 Only seen this now Cheers man