+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Wheels & Tyres (https://www.japcarforum.com/forumdisplay.php?fid=152)
+--- Thread: Different PCD'd wheels (/showthread.php?tid=13094)
Different PCD'd wheels - Colin G - 17-09-2021
Ok guys. Got a question regarding wheels with a different pcd to standard.
Would a set of 18"x8 et35 with a 5x112 pcd fit the IS without much work???
Or what work if any would be needed to make them fit??
Different PCD'd wheels - sprinter2012 - 17-09-2021
5 x 112 would fit quite fine using 'wobbly bolts', which let the cone part of the bolt sit in the correct position while still allowing the bolt to remain straight.
Most important thing is that you have the correct centre bore (60.1), that way all the bolts do is keep the wheel against the hub, rather than supporting it's weight/keeping it centralised.
Different PCD'd wheels - Colin G - 18-09-2021
Cheers for the info, centre bore I believe is bigger but Id be getting spigot rings to sort that out. If they will fit with just using wobbly bolts then that's spot on for me. Now to sort out my funds so I can source a set.