+- JapCarForum (https://www.japcarforum.com)
+-- Forum: General Discussions (https://www.japcarforum.com/forumdisplay.php?fid=3)
+--- Forum: The JCF Lounge (https://www.japcarforum.com/forumdisplay.php?fid=17)
+---- Forum: Car Related Chat (https://www.japcarforum.com/forumdisplay.php?fid=147)
+---- Thread: Is200 turbo (/showthread.php?tid=13478)
Is200 turbo - ginge 1988 - 24-02-2022
Dose anyone know if putting the lambda sensors in different places wud corz one bank to run rich and the other to run lean
Is200 turbo - jay_russell - 24-02-2022
your meant to run them as one. so you need to trick the ecu with the same reading on both
Is200 turbo - Rabster - 24-02-2022
As above if you piggy back the wiring it will fool the system I had only 1 sensor on my manifold but wired it to both plugs
Is200 turbo - ginge 1988 - 26-02-2022
Thanks witch one ive got one close to the exist on turbo and more down pipe thanks
Is200 turbo - Rabster - 26-02-2022
can you get a picture mate
Is200 turbo - jay_russell - 26-02-2022
i took the lower one as i have no cat there
Is200 turbo - ginge 1988 - 28-02-2022
Thanks for info guys running miles better