+- JapCarForum (https://www.japcarforum.com)
+-- Forum: General Discussions (https://www.japcarforum.com/forumdisplay.php?fid=3)
+--- Forum: New Members (https://www.japcarforum.com/forumdisplay.php?fid=16)
+--- Thread: New Member hoping to install sc to my is200 (/showthread.php?tid=13697)
New Member hoping to install sc to my is200 - Xtremist - 06-05-2022
Hi everyone I've just joined and going for some Intel on installing a eaton m62 supercharger on my lexus is200 I.e what parts are necessary for the install etc I've already got the supercharger just want to know what is next
Thanks all hope I get some feedback
New Member hoping to install sc to my is200 - Lexuspat - 07-05-2022
Welcome mate there are plenty of threads on this already.
But to give a fast break down
Supercharger
Custom made cradle
Custom made inlet and outlet
Blackbox for ecu
Fmic
Bypass valve
Filter
Tensioner
Belt
Main pulley
A load of pipework
A load of silicone bends
And clamps
Sent from my GT-I9505 using Tapatalk
New Member hoping to install sc to my is200 - Lexuspat - 07-05-2022
However it all depends on the cradle if u get that wrong then nothing else u do will make it run right
Sent from my GT-I9505 using Tapatalk
New Member hoping to install sc to my is200 - Xtremist - 07-05-2022
Thanks Lexuspat I can source most things but the hardest part is getting the cradle I was going to fabricate my own based on the tte one obviously wont be exact but I cant see why it wont work. As long as it has strength and allows the inlet and outlet to flow past nicely
Also does the tte kit come with the black box as I've not seen this with the kids advertised before
All input welcome I'm new to this ......
New Member hoping to install sc to my is200 - Xtremist - 07-05-2022
Kits not kids
New Member hoping to install sc to my is200 - Xtremist - 07-05-2022
Also what size main pulley is best and where is the best source for this ive read that a mercedes 230 slk one will fit is this true
New Member hoping to install sc to my is200 - Xtremist - 07-05-2022
Is this any good as the black box you mentioned
300693918122 eBay item number
Sent from my GT-I9505 using Tapatalk
New Member hoping to install sc to my is200 - 350zLad - 07-05-2022
Hi mate welcome to the club, sorry can't help with that haha
New Member hoping to install sc to my is200 - Lexuspat - 07-05-2022
Black box is what most use and there made by a member on here.
The slk pulley wont work trust me.
Im 80% through making my own and ive researched every pulley out there. It has to be made.
With regards the cradle u really need an oem one and a jig made from that even 1mm out the belt with shred and u wont be able to use any power. I have a jig here which is a direct copy
Sent from my GT-I9505 using Tapatalk
New Member hoping to install sc to my is200 - Xtremist - 07-05-2022
How much did your cradle cost to make lexuspat or should I say how much would you charge to have one made and shipped by your fabricator using your jig
Sent from my GT-I9505 using Tapatalk