+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: General Car Maintenance (https://www.japcarforum.com/forumdisplay.php?fid=150)
+--- Thread: ITB throttels on 1GFE (/showthread.php?tid=15094)
ITB throttels on 1GFE - Danis200 - 17-02-2024
I've been searching if it's possible to get or put itb's on a
1gfe engine? Had somebody done it or try it before? I've seen itb kits on a 1jz-ge engine. To me it look the same,but can it be possible to put it on a 1gfe engine.
ITB throttels on 1GFE - dimis - 17-02-2024
Waste of money! Try another route.
ITB throttels on 1GFE - el_bandido - 17-02-2024
You will need a custom set made and then an after market ECU to run the car. It will run well into the thousands of pounds just to gain yourself maybe 5 HP per cylinder if you are very lucky.
Would probably sound wicked though.
ITB throttels on 1GFE - Danis200 - 17-02-2024
I understand. It's possible than. 6 times 5hp,is 30hp more
. But is more that i'll do to the engine. Like exhaust manifold,lightweight flywheel and clutch and 2,5 inch catback system. So i would be very happy to get close to 200hp. Don't forget the stand alone ecu. But do you know where i can get itb's,like the kit thet have for the 1jz or 2jz engines?
ITB throttels on 1GFE - Wayne - 17-02-2024
Seems a very expensive way to get around 200hp
ITB throttels on 1GFE - Sparkystav - 17-02-2024
I don't know where you'll get them from, but I had a mate who was looking to fit the bmw m3 individual throttles to his supra. They could a good project? Maybe not full itb's but could be good
ITB throttels on 1GFE - el_bandido - 17-02-2024
Jenvey would be my first port of call. I'd have thought m3 throttle bodies would be too big.