+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: High Comp B20 Build "The Drag Rat" (/showthread.php?tid=15236)
High Comp B20 Build "The Drag Rat" - All Motor - 23-03-2024
I started this build a few years ago as a bit of fun then thought i'd set myself a challenge and try and be the first in the 11's with a n/a B series but due to "problems" that didn't happen and someone beat me to it but project 11 is still go be good to be the 2nd to make it and i'll see what to do with her after that
Shell
Full re-spray in VW caddy grey metallic
Side bump strips fully removed and flushed
Flushed front bumper
Mb6 Vti-S front lip
Colour coded side skirts / Door handles
One piece late spec spoiler colour coded
JDM bonnet in satin black with J's style racing bonnet vent
JDM tailgate ( 2nd skin removed )
one RRS fixed bucket seat
Ebay rear spring adjusters on oem shocks
Eibach front lowering springs on oem shocks
mazda mx5 Enkei wheels on Hancook RS2's
23x8x13 m+h slicks on Lenso drag wheels
Half White Roll Cage
Removed spare wheel well
Perspex front and rear side windows
Custom Rear diffuser
Engine
B20 Block
ACL Bearings
Custom Cylinder support system
Skunk Ultra Street Inlet manifold ( ported + polished )
Universal 80mm TB
Rocket M24xx Cams
Buddy Club Cam gears
ITR girdle + sump + pick up
Eagle 'H' Beam Rods
Wiseco 84.5mm @ 13.1 comp + rings
GE vtec conversion Kit
Action Clutch stage 4
Fidenza lightweight flywheel
ARP Head studs
ARP Main studs
ARP rod bolts
B16 head ( ported and polished )
Supertech Springs and Retainers
Custom Side exit Exhaust
Tegiwa V stack System
3.5 inch custom intake
RC440 Injectors
Custom breather catch tank
Hondata S300
ITR Rad and Fan
Mapped by Torque Developments 214bhp @ hubs
here's a few pics of the build up,
Oasis lid to show the size
![[Image: P8070004_zpse7453bab.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/P8070004_zpse7453bab.jpg)
![[Image: Hone_zps603a8729.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/Hone_zps603a8729.jpg)
everything has been weighed and shaved to help balancing at high rpm's
![[Image: Rod_zpsbb9a49e1.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/Rod_zpsbb9a49e1.jpg)
and a bit of comp got to be careful with cam timing !
![[Image: pistoncomp_zps68edb9d5.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/pistoncomp_zps68edb9d5.jpg)
Hone work and cylinder support system done by CPL
and on to the shell, I only paid £300 for the shell with the idea of making it light as possible on a tight budget so hello Mr A Grinder lol
![[Image: rearq2_zps58ea2ace.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/rearq2_zps58ea2ace.jpg)
not much weight was actually removed but it helps with aero
![[Image: removedboot_zpsf66b2102.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/removedboot_zpsf66b2102.jpg)
![[Image: perspex2_zps3c4fb5df.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/perspex2_zps3c4fb5df.jpg)
![[Image: perspex3_zps6eb7fbad.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/perspex3_zps6eb7fbad.jpg)
door bars have none gone and painted black but no updated photo yet,
![[Image: doordiet_zpsc9b02ae3.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/doordiet_zpsc9b02ae3.jpg)
and a few pics of the engine installed
![[Image: b203_zpsswy8alz9.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/b203_zpsswy8alz9.jpg)
![[Image: b201_zpsuurwfuqy.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/b201_zpsuurwfuqy.jpg)
80mm TB on a polished Skunk ultra street inlet
![[Image: 11039430_10155255051335392_1780965156_n%...2e2fm4.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/11039430_10155255051335392_1780965156_n%201_zpsuz2e2fm4.jpg)
before and after pic of the polished inlet, oem is pretty bad tbh
![[Image: beforeandafter_zps92f25264.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/beforeandafter_zps92f25264.jpg)
just to give an idea of how big the filter is
![[Image: Velocity_zpstcc0cyiv.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/Velocity_zpstcc0cyiv.jpg)
![[Image: b202_zpst6mmnpzv.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/b202_zpst6mmnpzv.jpg)
High Comp B20 Build "The Drag Rat" - All Motor - 23-03-2024
and a few more pics i missed btu cant edit my first post
![[Image: drageg1_zpswm4ydled.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/drageg1_zpswm4ydled.jpg)
![[Image: egdrag_zpswcdmk52q.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/egdrag_zpswcdmk52q.jpg)
![[Image: egdiff2_zpsusjcavue.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/egdiff2_zpsusjcavue.jpg)
The noise maker !!
![[Image: 3inch_zpssnbtrt7i.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/3inch_zpssnbtrt7i.jpg)
awesome detail pic done by the gf,
![[Image: b208_zpsxbnvlviw.jpg]](http://i41.photobucket.com/albums/e271/Mrpulsar/The%20Drag%20Rat/b208_zpsxbnvlviw.jpg)
High Comp B20 Build "The Drag Rat" - Sparkystav - 23-03-2024
looks a good project mate!
what have you had it running so far?
High Comp B20 Build "The Drag Rat" - All Motor - 23-03-2024
Sparkystav looks a good project mate!
what have you had it running so far?
Thanks mate Well she's just topped the Outlaws 1/4 mile leader board with a 12.11 @ 111mph :Bazza: she has some more power now and another 15-20kg's lighter so hoping for around the 11.8 mark but any 11 would be awesome :biggrin:
https://www.youtube.com/watch?v=DdUliqE6lkk
High Comp B20 Build "The Drag Rat" - Sparkystav - 23-03-2024
Sounds epic!
High Comp B20 Build "The Drag Rat" - Wayne - 23-03-2024
That poor guy in his MG...
High Comp B20 Build "The Drag Rat" - EmZ - 23-03-2024
Awesome! Sounds like a great project. Great video as an example
High Comp B20 Build "The Drag Rat" - All Motor - 24-03-2024
Wayne That poor guy in his MG...
i'm sure he though he had a chance it's only a civic after all lol
he must have looked like this after the green went
hock: