widnes_is200's headrest screen walkthrough

widnes_is200's headrest screen walkthrough - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Car Audio/Video/Electronics/Security (https://www.japcarforum.com/forumdisplay.php?fid=151)
+--- Thread: widnes_is200's headrest screen walkthrough (/showthread.php?tid=2934)

Pages: 1 2 3 4 5 6

widnes_is200's headrest screen walkthrough - widnes_is200 - 29-12-2017

firsty can i oppologise for the terrible photo quality, it was only when the job was finished that i realised just how bad the lense was on my phone,

step 1 , mark out were u would like ure screen too go with a pencil, it is important too leave about half inch all the way round as this has to be a tight fit,

[Image: Image024.jpg]

step 2, cut the headrest from corner too corner like a cross and by folding the leather back , this gives u the area that u need too be cutting the foam

[Image: Image025.jpg]

step 3, tape ure leather edges back out of the way, this gives u ure shape and makes acess easyer,
[Image: Image026.jpg]

step 4, cut away ure foam with patience, a little at a time untill u get the depth of ure back bracket, remember u can always take away but cant put back!
[Image: Image027.jpg]

step 5, when ure happy with ure bracket , (this shoud be a tight fit as uve left half inch all way round) secure with screws provided, if as on the is200 there is very little plateing in the headrest then a adhesive sutch as silicone will do.
[Image: Image028.jpg]

pop ure screen in and ure wire out of the bottom,
[Image: Image030.jpg]

repeat with the second headrest.
[Image: Image033.jpg]

it rearly is that easy if u just take ure time, it took me about 1 1/2 hours for each 1, when fitted and wired ille post more pics butt this will probably not be till the week end, hope this helps peeps.

widnes_is200's headrest screen walkthrough - Bandit - 29-12-2017

Nice job and walk through matey, :thumbup1:

widnes_is200's headrest screen walkthrough - widnes_is200 - 29-12-2017

by the way folks, these headrests were 24.99 eatch on ebay he has about 6 left, the supplyor in work charges 70 for the same screen,

widnes_is200's headrest screen walkthrough - Saraj - 29-12-2017

very nice walkthrough, all these walkthroughs will come in use, when i get my hands on an IS200

widnes_is200's headrest screen walkthrough - Sparkystav - 29-12-2017

shocking pics mate lol

how have you run the wire into the seat? ive got mine half made here at home just need to edge them off (as they dont have holders) and their done

widnes_is200's headrest screen walkthrough - widnes_is200 - 29-12-2017

havent got that far mate, hopefully doing the seat at the weekend, my pics are beyond shocking mate, butt it was to late

widnes_is200's headrest screen walkthrough - SHAHZ - 29-12-2017

blimey cracking pics!!:biggrin:......nice write up......What make & size are the monitors and what is the pic quality like??

So does the IS headrest have any plate in it?

widnes_is200's headrest screen walkthrough - Sparkystav - 29-12-2017

SHAHZ blimey cracking pics!!:biggrin:......nice write up......What make & size are the monitors and what is the pic quality like??

So does the IS headrest have any plate in it?

Not really, just a big blob thing in the middle of it,and fairly stiff foam

widnes_is200's headrest screen walkthrough - widnes_is200 - 29-12-2017

SHAHZ blimey cracking pics!!:biggrin:......nice write up......What make & size are the monitors and what is the pic quality like??

So does the IS headrest have any plate in it?

5.6 inch mate , ice make, the headrests have very little plate in them , nothing too screw to anyway, pic quality is unknown yet , butt ive had a good report from anouther firm inwork,

widnes_is200's headrest screen walkthrough - SHAHZ - 29-12-2017

widnes_is200 5.6 inch mate , ice make, the headrests have very little plate in them , nothing too screw to anyway, pic quality is unknown yet , butt ive had a good report from anouther firm inwork,

Cool, let us know what you think of them, going to be doing this soon myself, so will need to get some monitors, was thinking of getting 6.5" screens but yours seem to fit just right