+- JapCarForum (https://www.japcarforum.com)
+-- Forum: General Discussions (https://www.japcarforum.com/forumdisplay.php?fid=3)
+--- Forum: New Members (https://www.japcarforum.com/forumdisplay.php?fid=16)
+--- Thread: is200 cd player replacement (/showthread.php?tid=5550)
Pages:
1
2
is200 cd player replacement - ged - 25-07-2018
hi everyone
just bought a used is200 and as usual cdplayer is err code 3 ,took it to bits and cleaned laser etc but no change .
my question is can i put in an aftermarket radio without using a bypass lead and still use existing amp ?
any help would be appreciated.
is200 cd player replacement - widnes_is200 - 25-07-2018
hi ged and welcome too the club. i have no exact answer for u other than when i bought my is it had a after market stereo and was wired too the origional loom, i changed this for a bypass cable
is200 cd player replacement - garyskisplym - 25-07-2018
welocme to the site.
Im sure someone soon will be along to answer this question, but same what i am thinking
is200 cd player replacement - Lexusboy - 26-07-2018
Ged welcome to the club.
So to get the right answer to your question.
What model IS do you have and what age is your car.
is200 cd player replacement - kevinsgs300 - 26-07-2018
welcome to the club mate
is200 cd player replacement - jay_russell - 26-07-2018
you might find like me that you have no amp and you just buy a mr2 harness.... and welcome to the club. :thumbup1:
is200 cd player replacement - ged - 10-08-2018
thanks for all the replies
i have a 2000 is200 se thought i might rewire original loom going into cd player assuming it i can find wiring diagram of the connector and still use original amp otherwise bypass lead it is.
is200 cd player replacement - Y2KANJAR - 10-08-2018
or you can buy another lexus head unit
is200 cd player replacement - ged - 13-08-2018
bought the bypass lead fitted it to the car and didnt work
the lead had 2 yellow cables joined together and both the red and the yellow power cables had to plug into it for it to work but wouldnt keep its memory.
Any ideas would be appreciated.
is200 cd player replacement - Rabster - 13-08-2018
you need to swap the red and yellow leads over as the 12v ignition line is in the wrong place on the leads hence the 2 connectors just put
red - yellow
yellow - red
this should fix it mate