+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: General Car Maintenance (https://www.japcarforum.com/forumdisplay.php?fid=150)
+--- Thread: Is200 Engine Bay Bolts (/showthread.php?tid=7244)
Is200 Engine Bay Bolts - Rabster - 09-03-2019
OK so does any one have a detailed list of the bolts in the is200/300/altezza engine bay.
there is a company that offers them for the Is300 in the states but by all accounts not for the is200....
for example
The main engine cover is held on by M6x25 (one is M6x35)
The VVTi cover is held on by M6x25
And the fuse box covers are M6x20
thanks to sprinter2012 for the above
Is200 Engine Bay Bolts - Cous3 - 09-03-2019
Rab I changed quite a few of those bolts for stainless steel ones, I thought there was a list somewhere because I got a selection of the right sizes before I started.
I think I may have just ordered a dozen of each size on Ebay at the time so I had spares, what I do know is I used them all up when I put the bonnet struts on. They are only a small mod but make a hige differance.
Keith
Is200 Engine Bay Bolts - is300_dino - 09-03-2019
andy there is this site ive found dont know if its the same one but you should see how much it is for a full titanium kit for the 300.... $541.98!!! thats rediculous
see here
http://www.dressupbolts.com/products/products-page/titanium-fastener-kits/lexus-is300-1998-2005
Is200 Engine Bay Bolts - Rabster - 09-03-2019
Yeah that's the company I found I'm sure we can make our own kits a darn bit cheaper lol
Is200 Engine Bay Bolts - is300_dino - 09-03-2019
i should hope so mate! they have got quite a few pics of the some of the kit its just getting all the right lenghts
Is200 Engine Bay Bolts - Lexuspat - 10-03-2019
Surely you could get the bolts cheaper I've found loads of stainless steel ones on flebay for not a lot even found titanium ones
Don't think I want to spend anywhere near $500 on bolts that's for sure
Is200 Engine Bay Bolts - Rabster - 10-03-2019
yah thats my feeling i know i can get them in bulk and alot cheaper the catch is trying to narrow down exactly what is required....
Is200 Engine Bay Bolts - toxo - 10-03-2019
You best get measuring then
Is200 Engine Bay Bolts - jomo - 10-03-2019
Why not ask Demon (who's breaking his is200) to strip out all the nuts n bolts of his eng bay with lables of where they came from, and send them to you so you can match them up?
Just my 2p worth.......
Is200 Engine Bay Bolts - Rabster - 22-03-2019
right im placing an order today hopefully for the following
20 x M6 x 15 Stainless A2 Grade Allen Key button Head
20 x M6 x 20 Stainless A2 Grade Allen Key button Head
20 x M6 x 25 Stainless A2 Grade Allen Key button Head
20 x M6 x 30 Stainless A2 Grade Allen Key button Head
20 x M6 x 35 Stainless A2 Grade Allen Key button Head
10 x M4 x 15 Stainless A2 Grade Allen Key button Head
10 x M4 x 20 Stainless A2 Grade Allen Key button Head
10 x M4 x 30 Stainless A2 Grade Allen Key button Head
10 x M5 x 15 Stainless A2 Grade Allen Key button Head
10 x M5 x 20 Stainless A2 Grade Allen Key button Head
10 x M5 x 30 Stainless A2 Grade Allen Key button Head
60 x M6 x Stainless Washer A2 Grade
40 x M6 x Stainless Penny Washer A2 Grade
60 x M6 x Stainless Nuts A2 Grade
can anyone think of anything else i may need size wise anything that i dont use from my list will then go to make more kits up for people.....