JapCarForum
Plastidip - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: General Discussions (https://www.japcarforum.com/forumdisplay.php?fid=3)
+--- Forum: The JCF Lounge (https://www.japcarforum.com/forumdisplay.php?fid=17)
+--- Thread: Plastidip (/showthread.php?tid=7389)



Plastidip - Lexusboy - 24-03-2019

I am thinking of using Plastidip on my rear badges.

Has anyone tried using this yet?

Click me


Plastidip - DaveEdin - 24-03-2019

Is this purely to protect them Ian?

PS Your link has an extra http in it...


Plastidip - Tango - 24-03-2019

Lexusboy I am thinking of using Plastidip on my rear badges.

Has anyone tried using this yet?

Click me

They do a mix your own colour kit, so it's possible to add a colour tint to the clear. Thinking of a 'Black Pearl' effect. Also note the Plastidip has a matt finish and needs a further clear topcoat to make it gloss.


Plastidip - Lexusboy - 25-03-2019

Here a vid on how to use Plasti dip

http://youtu.be/SP8owpbR1iw

You can colour code your emblems grill and even your wheels with this stuff
The items your need to do this is the following



Materials
1. Can of PlastiDip
2. Small plastic pick/spackle thing.
3. Masking Tape
4. Newspaper
5. Rubbing Alcohol, Soap, water
6. Cotton Swabs
7. Clean Towels

Dave no this is so you can change the colour of your emblems.

How to use mask of a area around say a emblem with newspaper and tape you dont need to be up against the emblem as this stuff does not stick to you car paint,
Apply around three coats of your colour letting it dry fully between coats and don not over spray.

Once your item has been finished and is tootal dry just peel off the plasti dip from your paint work.

Questions : can i take it off if i dont like it or want to change colour
Answer is yes just peel back the plasti dip and start again.

Always make sure your clean your work surface before starting ideally with Alcoho and a few cotton buds to get tight into the corners


Plastidip - Phil01 - 25-03-2019

lol,
be careful when you remove the clips on the chrome trim as they can easily break,,,,,
ohh dear, I have just broke them.


Plastidip - Lexusboy - 25-03-2019

On the emblems you can leave them on the body work saving you damaging them if you had to remove them...


Plastidip - Phil01 - 25-03-2019

how can you leave your emblem on, as when you spray it will form a skin, if you peel it off the paint it will then peel off completely, emblem coverage as well,
If you look on a few plastidip removal vids it comes off as one piece,
even in his tutorial vid he emphasises it will all peel off @ 5.06,, so be careful.

Removal, it comes off as a skin,,
http://www.youtube.com/watch?v=HLsu6TQPvq4&feature=related


Plastidip - Phil01 - 25-03-2019

Nice even finish tho, quite like the idea and look of it