+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Car Audio/Video/Electronics/Security (https://www.japcarforum.com/forumdisplay.php?fid=151)
+--- Thread: Got a lot done today! (/showthread.php?tid=7703)
Pages:
1
2
Got a lot done today! - jimxms - 26-04-2019
So this morning I decided to install my Zeitronix ZT2 Wideband / Boost data logger. Took pretty much all day to get it installed neatly as I had to get the car up on jack stands so I could get underneath it and install the wideband sensor and pull out both seats and parts of the dash so I could run the cables round the car over to my PC.
Took a quick vid of the startup (poor quality - iphone):
http://www.youtube.com/watch?v=wIbpwNaqNiI
I also installed a vacuum manifold in the engine bay so I could run separate vacuum lines to each of the devices that need to read boost pressure (Zeitronix, Emanage, BOV, Split Sec ESC1) but I'll get some proper pics of that up tomorrow as its super sexy
Got a lot done today! - Dark Samurai - 26-04-2019
Is the middle dial AFR mate?
Got a lot done today! - Rabster - 26-04-2019
looking good mate
we really need to get yours and mine together for a shoot lol
Got a lot done today! - Lexusboy - 26-04-2019
Jim are you happy in the way its all is running now?
Looks good
Got a lot done today! - jimxms - 26-04-2019
Dark Samurai Is the middle dial AFR mate?
Yes it is matey. Its fully customisable though so you can chop and change the dials. At the moment the only ones that work are the wideband, RPM and Boost (though it will only read vacuum until charger is on).
I've still got to work out the throttle position one, and will also probably add exhaust temp probe and voltage one too (avoid another flat batt!)
Rabster looking good mate
we really need to get yours and mine together for a shoot lol
Deffo mate. Just name the day (a dry clear one :p). I'm on paternity for the rest of this week and most of next.
Got a lot done today! - jimxms - 26-04-2019
Lexusboy Jim are you happy in the way its all is running now?
Looks good
100% matey.
I got the 7" housing that I wanted.
Fixed the problem with the touchscreen
Spent a lot of time tidying up the Car PC cables as were far too long and kept getting caught on the seat.
And I much prefer the Zeitronix to having gauges all over the car. Sleeper mode ftw
Got a lot done today! - Sparkystav - 26-04-2019
Looks good mate.
as for the tap offs, i have one of these that were being sold on the Supra forum:
![[Image: InletPlenum.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/Mods/InletPlenum.jpg)
one tap off, then a plenum to take other taps from
Got a lot done today! - jimxms - 26-04-2019
Yep thats pretty much what I'm running although not quite as fancy. I've just got barbs on mine rather than compression fixings.
Got a lot done today! - Sparkystav - 26-04-2019
yeah thats what it came with, but i changed it all for Swagelok fittings, much tidier and more secure.
Got a lot done today! - mplavery - 26-04-2019
Mate that is awesome
Really lovin that.. Well done mate