+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Car Audio/Video/Electronics/Security (https://www.japcarforum.com/forumdisplay.php?fid=151)
+--- Thread: Fitting the Racelogic Traction Control (/showthread.php?tid=7769)
Fitting the Racelogic Traction Control - Rabster - 04-05-2019
Ok so i have this unit sitting here and i still haven't got my backside into gear for fitting it.
Main reason is that the cables are a little to short i have lot of normal cable but this stuff is Braided thus stopping interference
will this make a big difference when it comes to fitting it ?
from a quick measure up i will have to extend all the wires from the main Brain to the ecu for the Injector wiring i think it was..
Any ideas im guessing Stav will answer lol
Rabs
Fitting the Racelogic Traction Control - Sparkystav - 04-05-2019
LOL ive just done the exact same thing.
The injector wires arent shielded just the ABS ones, I plan to mount it next to the glove box (same place as the OEM amp).
Is it long enough to reach across to the drivers door? (The abs wires are right on that side). If not let me know.
But the Injector wires can be normal, though i needed to extend mine so i found some 12 core cable and used that to keep it all together.
the earth is easy, and power will go to my fuse box (where the PAS airbag was) and the RPM to my ecu thats in the same place
Fitting the Racelogic Traction Control - Rabster - 04-05-2019
Nah they are no where near long enough lol
I'm going to Hopefully mount it in the same place as factory amp aswell so will need to extend them all :-(
I'm going to bring it with this weekend and hopefully fit as I want it running for the ring trip for safety
Fitting the Racelogic Traction Control - Sparkystav - 04-05-2019
Not a prob,
will see what cable i have, pretty certain i have enough shielded for you
Fitting the Racelogic Traction Control - Rabster - 04-05-2019
That would be great if you have mate :-)