+- JapCarForum (https://www.japcarforum.com)
+-- Forum: General Discussions (https://www.japcarforum.com/forumdisplay.php?fid=3)
+--- Forum: The JCF Lounge (https://www.japcarforum.com/forumdisplay.php?fid=17)
+--- Thread: Help with wiring in Sussex or near as... (/showthread.php?tid=7774)
Pages:
1
2
Help with wiring in Sussex or near as... - BOOSST - 05-05-2019
I was hoping to have a few bits done for the Japshow, but sadly help I had arranged has let me down, something I have never done to them I might add :blink:
So, since I am unable to do it myself, I am searching for someone who is confident and neat with wiring.. want to fit and wire some fans in engine bay, some lighting and some more clever wiring with lights possibly..
Since i won't owe the helper any previous favours, i can only offer some cash for thier time ..
I am based in Burgess Hill.. anyone :blink:
Help with wiring in Sussex or near as... - Rabster - 05-05-2019
does it need to be done before the Show ?
or can we do it at the show ?
Help with wiring in Sussex or near as... - BOOSST - 05-05-2019
Rabster does it need to be done before the Show ?
or can we do it at the show ?
if its not done in time for the show then thats just bad luck and a shame..
But i think doing stuff at the show is not fair on someone really, we are there to enjoy after all.. not work on someones car.
I am so frustrated with been let down and I wish there was a sodding course or place to go and learn how to myself do these things for myself !
Help with wiring in Sussex or near as... - Rabster - 05-05-2019
yes and no mate but sometimes its the best place to learn things im there all off saturday and 9/10 i have a full kit for electronic gizmo's with me im sure it wouldn't take long to get things done.
if you want and can get all the bits installed but not wired im sure we can do that fairly easily and i am fussy about my wiring lol
Help with wiring in Sussex or near as... - BOOSST - 05-05-2019
Rabster yes and no mate but sometimes its the best place to learn things im there all off saturday and 9/10 i have a full kit for electronic gizmo's with me im sure it wouldn't take long to get things done.
if you want and can get all the bits installed but not wired im sure we can do that fairly easily and i am fussy about my wiring lol
I might take you up on it Andrew, I need to look at the chaos the car is in presently.. I took the dash apart to do some bits and left it that way in case I needed to get in and wire in swithches etc.. so job one, is put it back together now.
If i can get the lighting and wiring in place and then secure the fans to the custom lid, then it could be a plan with your help.. I will see how I get on :blink:
Help with wiring in Sussex or near as... - Fozzy - 05-05-2019
I'll be along as well, and im fairly handy with the two, so i might be of some help putting things back together
Help with wiring in Sussex or near as... - Phil01 - 05-05-2019
And me,
Help with wiring in Sussex or near as... - BOOSST - 05-05-2019
Thankyou guys, I appreciate your help.. i will try to get everything in place tomorrow so most of it should be easy at the weekend.. weather allowing.. obviously if its to hot in the baking sun we won't be fit to wire anything :whistling:
Help with wiring in Sussex or near as... - BOOSST - 05-05-2019
Hurricane.. I may have something else of interest to you for a mod on your car.. :mellow: an engine lid
Help with wiring in Sussex or near as... - Fozzy - 06-05-2019
what engine lid would that be then? Just thinking if we dont get too much done this weekend, i could come to yours next weekend to collect the bumper and give you a hand with some wiring as well