+- JapCarForum (https://www.japcarforum.com)
+-- Forum: General Discussions (https://www.japcarforum.com/forumdisplay.php?fid=3)
+--- Forum: The JCF Lounge (https://www.japcarforum.com/forumdisplay.php?fid=17)
+--- Thread: Got my work cut out! (/showthread.php?tid=8085)
Got my work cut out! - jimxms - 07-06-2019
![[Image: l_alky.jpg]](http://i2.sqi.sh/s_1/9gv/l_alky.jpg)
This should be an interesting install for sure! What we have here is a rather high pressure pump with braided lines, A progressive controller for the pump with a box for making adjustments inside the car, a boost sensor for activation and lots of other odds and sods!
Got my work cut out! - Sparkystav - 07-06-2019
~Thats a fun challenge!
Would be interesting to see the results.
Got my work cut out! - jimxms - 07-06-2019
Aye, its quite a big kit to hide somewhere. Space is at a premium in my engine bay as it is!
I'm also going to need to get it properly tuned once i start spraying. Probably a good thing as I have a feeling I'm running flame-spittingly-rich at the moment.
Got my work cut out! - jimxms - 07-06-2019
Marsdendean Get it mapped, last thing you want is it to go bang after you have spent all that hard earned cash!!
Aye. Though I did attract the attention of two females this evening while out driving.
They shouted "is it supposed to do that" when the exhaust popped, so not exactly "hi sexy", but never mind :p
Got my work cut out! - Sparkystav - 07-06-2019
get the battery relocated to the boot! voila more space!
Got my work cut out! - jimxms - 07-06-2019
Sparkystav get the battery relocated to the boot! voila more space!
Is it as simple as it sounds? hook some 0AWG wire up to the existing contacts, run the wire through the firewall, down the side of the car, into the boot. Voilla?
Got my work cut out! - Sparkystav - 07-06-2019
jimxms Is it as simple as it sounds? hook some 0AWG wire up to the existing contacts, run the wire through the firewall, down the side of the car, into the boot. Voilla?
Pretty much.
Im fitting one of these in the engine bay:
![[Image: GE55-FIA-Battery-cut-off-1.jpg]](http://www.raceways.co.uk/images/GE55-FIA-Battery-cut-off-1.jpg)
And putting a 120A ANL fuse near the battery though just incase:
![[Image: ANL_250_side.gif]](http://www.vteworld.com/content/electromech/fuse/images/anl/ANL_250_side.gif)
Got my work cut out! - jimxms - 07-06-2019
What on earth is that top thing? Some kind of kill switch for disconnecting the battery from the engine bay?
Got my work cut out! - Sparkystav - 07-06-2019
exactly that mate, its a fia approved one so when wired correctly will kill a running engine as well
Got my work cut out! - Stoney - 08-06-2019
I think it is only a matter of time before you will have no option but to boot your battery! The rate you are adding things to that bay.
I think it really is as easy as extending some wires. Though for safety you should fuse it correctly, as Stav says, and I would also have it somehow enclosed and vented to outside.