+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: General Car Maintenance (https://www.japcarforum.com/forumdisplay.php?fid=150)
+--- Thread: question and help needed (/showthread.php?tid=8458)
question and help needed - Lexuspat - 22-07-2019
hi all,
i want to change the fuel filter but am unsure where it is on the is200, could someone point me in the right direction.
also i have a fuel pressure gauge that i wnt to fit (another toy under the bonnet) but am wondering where best to fit it and which pipe is it that i attach it to
any help on the matter would be great
any pictures would be even better
question and help needed - FirebirdPhil - 22-07-2019
fuel filter is in the fuel tank and is a life long part, no need to change.
question and help needed - Lexuspat - 22-07-2019
well thats a plus thanks Phil
question and help needed - Lexuspat - 25-07-2019
Anyone shed some light on where to attach the gauge in the engine bay
question and help needed - rob - 25-07-2019
on the end of the fuel rail - you will need a banjo fitting, but i see it as another toy only TBH
question and help needed - Sparkystav - 25-07-2019
The fitting should be m12x1.25 so you can get an adaptor for oil pressure sender that will change that to the 1/8bsp fitting your pressure sensor probaly is.
question and help needed - Lexuspat - 25-07-2019
thanks guys
@rob it is only another toy anyway just something to look nice in the engine bay
question and help needed - Lexuspat - 29-07-2019
right well ive sorted one part the vacuum hose but can anyone tell me the size of the is200 fuel line as im thinking of mounting the gauge slightly further away as i think i wont be able to mount it near the end of the fuel rail
so been looking at braided fuel lines on ebay but not sure on size
also can someone point out where i should cut into the line to mount this gauge