+- JapCarForum (https://www.japcarforum.com)
+-- Forum: General Discussions (https://www.japcarforum.com/forumdisplay.php?fid=3)
+--- Forum: The JCF Lounge (https://www.japcarforum.com/forumdisplay.php?fid=17)
+--- Thread: Anyone near Wickford got a 22mn box wrench (/showthread.php?tid=8578)
Anyone near Wickford got a 22mn box wrench - jimxms - 06-08-2019
Need one with quite a deep angle as I'm trying to get the alternator pulley off and my wrench doesn't have quite a steep enough angle to get in there.
Anyone near Wickford got a 22mn box wrench - Lexusboy - 06-08-2019
Sorry buddy i don't have one
Anyone near Wickford got a 22mn box wrench - Phil01 - 06-08-2019
do you mean a socket or a stepped ring spanner?
Anyone near Wickford got a 22mn box wrench - jimxms - 06-08-2019
Or a fairly compact impact gun?
Anyone near Wickford got a 22mn box wrench - jimxms - 06-08-2019
Phil01 do you mean a socket or a stepped ring spanner?
Knew it had a proper name! Stepped ring spanner. This pulley is proving to be a right pita
Anyone near Wickford got a 22mn box wrench - Phil01 - 06-08-2019
hard to find a compact impact gun, my 18v 1/2 inch Snap-On is quite large but you are more than welcome to try it
Anyone near Wickford got a 22mn box wrench - Dark Samurai - 06-08-2019
Gornnn Dad!
Anyone near Wickford got a 22mn box wrench - Phil01 - 06-08-2019
you might find it awkward to tight to remove pulley nut in-situ, they are quite tight and sometimes need a vice to hold it whilst you impact it loose, (hit spanner with a hammer)
Anyone near Wickford got a 22mn box wrench - Lexusboy - 06-08-2019
The best i can offer is a 94af spanner or 22mm spocket:Sulk:
Anyone near Wickford got a 22mn box wrench - jimxms - 06-08-2019
Reckon the gun would fit between the aircon rad and the pulley? The main radiator is out atm?