+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Wheels & Tyres (https://www.japcarforum.com/forumdisplay.php?fid=152)
+--- Thread: Rx300 wheels on an is (/showthread.php?tid=9687)
Rx300 wheels on an is - Lexuslee - 18-12-2019
Will 18" 7j wheels from the rx300 fit on my is 200 with any problems?
Rx300 wheels on an is - clossie - 18-12-2019
I believe the answer is yes, but someone with more knowledge than me is bound to be along soon
Rx300 wheels on an is - Sparkystav - 18-12-2019
Yes they will mate.
Rx300 wheels on an is - ormi - 18-12-2019
aaaaaaaa but watch they have an offset of et35 so if you run lowering springs running 225/40/18 will catch the arches
Rx300 wheels on an is - greeny - 08-02-2020
offset fine according to driveright which is the program i run
Rx300 wheels on an is - Fozzy - 08-02-2020
Yes, but if your lowered and haven't got your arches rolled they will catch with that offset and rim size
Rx300 wheels on an is - ormi - 08-02-2020
Ok, I know as I've seen it done and I was also going to do it(got diff wheels though)...off set is et 35.....oh hang on I am running et35 and have to run 215 tyres..boom so yes standard Hight you will be ok lowered you won't!!!!
Rx300 wheels on an is - mattlaw - 11-02-2020
Your right ormi, I've got the rx wheels an if I put a few fatties in the back the wheels catch the arches going over bumps