JapCarForum
IS200 Dash clock help - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Car Audio/Video/Electronics/Security (https://www.japcarforum.com/forumdisplay.php?fid=151)
+--- Thread: IS200 Dash clock help (/showthread.php?tid=9880)



IS200 Dash clock help - Lexuspat - 14-01-2020

Hi all,

Need some help

My Dash clock and temp have stopped working the lights behind still work but no display

I recently had it out to change the bulbs inside but have done this before and now the display doesn't work

Anyone help


IS200 Dash clock help - Rabster - 14-01-2020

Did you push all the connectors home

Could it be not seated correctly if the lamps are on I would suspect a loose connection maybe


IS200 Dash clock help - Lexuspat - 14-01-2020

all the connectors are pushed in as far as they go Andy

im not sure whats happened to it to be fair would it be a connection within the block


IS200 Dash clock help - jasons - 14-01-2020

Fuse?


IS200 Dash clock help - Lexuspat - 14-01-2020

Surely if it was a fuse I wouldn't get any power to the A/C unit it self but this is just effecting the LCD display section all the other lights and controls work fine


IS200 Dash clock help - jasons - 15-01-2020

I say fuse because I blew one last week- it was one of the ones in the drivers footwell and mine wasnt working until replaced.

So, from my (personal) experience last week, I suggest Fuse!!

J


IS200 Dash clock help - Lexuspat - 15-01-2020

right ive checked all the fuses and there all fine so im now stumped as to what the hell is going on.

the connections are all in theres power as the lights all work and the dials do what they should i.e turn blowers on, hazards lights just the lcd display is gone


IS200 Dash clock help - Sparkystav - 16-01-2020

It could be knackered. Them bits are very temperamental to be put in and out


IS200 Dash clock help - toxo - 16-01-2020

Certainly wouldn't be the first Lexus to have a problem with that display. VERY common in LS400s and SC400s.