JapCarForum Trade Area Wanted Is200/300 coilovers

Is200/300 coilovers

Is200/300 coilovers

Pages (2): Previous 1 2
el_bandido
Account not Activated
2,757
05-12-2020, 05:53 PM
#11
you can wind the europas down to the ground if you really want, just make sure you get the geo sorted after they have bedded in.
el_bandido
05-12-2020, 05:53 PM #11

you can wind the europas down to the ground if you really want, just make sure you get the geo sorted after they have bedded in.

sprinter2012
Posting Freak
2,484
05-12-2020, 06:02 PM
#12
Chris0121 Dont You get natural camber when you lower a car only a little but it's only for the rears as I'm trying to keep the fat tyre look lol although I think ill have to drop down to 225's when I want to lower it further
And yh I think it was you sprinter, sorry blonde moment haha

It depends what you want the camber for, as you will get negative camber naturally by lowering the car (that's why the wheels don't hit the arches over bumps, because they don't travel completely vertical)

But if you want to keep the tyres level so you're not always driving on the inside edges, you will need to adjust it the other way which is where the bushes come in.

All depends how far you drop it though, if it's not stupidly low you will find that somewhere like WIM should be able to correct it enough in a geometry setup.
Edited 19-01-2013, 11:35 AM by sprinter2012.
sprinter2012
05-12-2020, 06:02 PM #12

Chris0121 Dont You get natural camber when you lower a car only a little but it's only for the rears as I'm trying to keep the fat tyre look lol although I think ill have to drop down to 225's when I want to lower it further
And yh I think it was you sprinter, sorry blonde moment haha

It depends what you want the camber for, as you will get negative camber naturally by lowering the car (that's why the wheels don't hit the arches over bumps, because they don't travel completely vertical)

But if you want to keep the tyres level so you're not always driving on the inside edges, you will need to adjust it the other way which is where the bushes come in.

All depends how far you drop it though, if it's not stupidly low you will find that somewhere like WIM should be able to correct it enough in a geometry setup.

Chris0121
Posting Freak
1,295
05-12-2020, 06:08 PM
#13
Ahhh i see thanks for the heads up guys can't wait to get them on the car the ride is so bad standard next up I think it'll be arb's but as long as most of the roll is gone and the humongous gap in the arches ill be a happy boy haha

So your tuckin 15's, that's cute but come back to me when you get some proper size wheels
Chris0121
05-12-2020, 06:08 PM #13

Ahhh i see thanks for the heads up guys can't wait to get them on the car the ride is so bad standard next up I think it'll be arb's but as long as most of the roll is gone and the humongous gap in the arches ill be a happy boy haha


So your tuckin 15's, that's cute but come back to me when you get some proper size wheels

el_bandido
Account not Activated
2,757
05-12-2020, 06:12 PM
#14
anti-roll bar upgrade is the best thing you can do to an IS200, hands down. I did the roll bars before I did the suspension and the difference even on stock springs was fantastic.
el_bandido
05-12-2020, 06:12 PM #14

anti-roll bar upgrade is the best thing you can do to an IS200, hands down. I did the roll bars before I did the suspension and the difference even on stock springs was fantastic.

Chris0121
Posting Freak
1,295
05-12-2020, 06:25 PM
#15
Are they expensive the Arb's hopefully the handling will get similar to how my mr2 was as that thing was amazing I'm the corners no roll whatsoever

So your tuckin 15's, that's cute but come back to me when you get some proper size wheels
Chris0121
05-12-2020, 06:25 PM #15

Are they expensive the Arb's hopefully the handling will get similar to how my mr2 was as that thing was amazing I'm the corners no roll whatsoever


So your tuckin 15's, that's cute but come back to me when you get some proper size wheels

el_bandido
Account not Activated
2,757
05-12-2020, 07:16 PM
#16
I managed to get some TRD ones cheap. You might be lucky if you keep an eye out and be patient.
el_bandido
05-12-2020, 07:16 PM #16

I managed to get some TRD ones cheap. You might be lucky if you keep an eye out and be patient.

Chris0121
Posting Freak
1,295
15-12-2020, 11:40 AM
#17
Meisters ordered now =)

So your tuckin 15's, that's cute but come back to me when you get some proper size wheels
Chris0121
15-12-2020, 11:40 AM #17

Meisters ordered now =)


So your tuckin 15's, that's cute but come back to me when you get some proper size wheels

Pages (2): Previous 1 2
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 0
Views 350
20-02-2025, 04:28 AM
Last Post by shabro
Replies 7
Views 466
18-01-2025, 02:13 PM
Last Post by cjoseph
Replies 5
Views 456
07-10-2024, 06:31 AM
Last Post by Jimbob-T-Lex
Replies 2
Views 308
21-09-2024, 03:07 AM
Last Post by beamstezza
Replies 1
Views 278
20-09-2024, 09:36 PM
Last Post by beamstezza
Replies 0
Views 199
18-07-2024, 07:15 AM
Last Post by dolina
Replies 0
Views 186
11-05-2024, 08:48 AM
Last Post by Wayne
Replies 1
Views 239
16-02-2024, 04:02 AM
Last Post by rob
Replies 3
Views 362
09-02-2024, 04:59 PM
Last Post by alexmid
Replies 6
Views 404
08-02-2024, 05:33 PM
Last Post by Is200kid