the car is back
the car is back
11-09-2018, 03:46 AM
jay_russell
11-09-2018, 03:46 AM #41so 155 it is..... as i maxed out mine at 235 with 4 bar fuel that confirms 155 as if they were 210 i would have got 250+
11-09-2018, 04:41 AM
dimis Stevie standard IS200 injectors are 155cc not 210cc, have a look here:
http://shed51.com/injectors.htm
That looks like the basis for lextreme.com's table.
dimis 1GFE uses Denso injectors which are violet
Doh ! Sorry, I was confusing things with my current injectors, which are light blue.
Well, that table (and lextreme's) says the 1G-FE injectors are sky blue, which makes it questionable IMHO.
Sorry guys but I'm finding it very hard to believe two unofficial tables on the Internet (which have major errors in them, e.g. colour of the injectors, number of holes) versus Lexus's official diagnostic procedures for testing their own injectors !
If they're 155cc, how on earth would the official manual say the injector should, under test, produce a flow rate of between 188cc and 252 cc ?
Jay - I believe that my car did around 250 bhp on the dyno at Noble with the stock injectors, but they would have been very high on their duty cycle. SPC Horsham have also produced this sort of power on the standard injectors. Then in my case the injectors were swapped for my bigger ones (550) to give a safety margin.
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
11-09-2018, 04:41 AM #42dimis Stevie standard IS200 injectors are 155cc not 210cc, have a look here:
http://shed51.com/injectors.htm
That looks like the basis for lextreme.com's table.
dimis 1GFE uses Denso injectors which are violet
Doh ! Sorry, I was confusing things with my current injectors, which are light blue.
Well, that table (and lextreme's) says the 1G-FE injectors are sky blue, which makes it questionable IMHO.
Sorry guys but I'm finding it very hard to believe two unofficial tables on the Internet (which have major errors in them, e.g. colour of the injectors, number of holes) versus Lexus's official diagnostic procedures for testing their own injectors !
If they're 155cc, how on earth would the official manual say the injector should, under test, produce a flow rate of between 188cc and 252 cc ?
Jay - I believe that my car did around 250 bhp on the dyno at Noble with the stock injectors, but they would have been very high on their duty cycle. SPC Horsham have also produced this sort of power on the standard injectors. Then in my case the injectors were swapped for my bigger ones (550) to give a safety margin.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 3
Views 415
Views 415
19-03-2020, 03:39 PM
Last Post byparthiban
Last Post by
Replies 38
Views 2,402
Views 2,402
24-02-2020, 08:10 AM
Last Post byjay_russell
Last Post by
Replies 25
Views 1,936
Views 1,936
27-01-2019, 04:07 PM
Last Post byjimxms
Last Post by
Replies 61
Views 4,122
Views 4,122
17-01-2019, 10:38 AM
Last Post byjimxms
Last Post by
Replies 16
Views 1,133
Views 1,133
26-12-2018, 05:00 PM
Last Post byRabster
Last Post by
Replies 10
Views 707
Views 707
23-09-2018, 10:50 AM
Last Post byPhil01
Last Post by
Replies 17
Views 982
Views 982
02-03-2018, 04:19 AM
Last Post bysteviewevie
Last Post by
Replies 9
Views 733
Views 733
07-06-2017, 12:50 PM
Last Post bySaraj
Last Post by