My celica supra

JapCarForum Cars, Cars, Cars! Project Cars My celica supra

My celica supra

Pages (5): Previous 1 2 3 4 5 Next

blueangel
Junior Member

08-12-2018, 02:59 PM

#21

Next due to the size of the headlights i had a little relocation job to do
[Image: 009-8.jpg]

This battery has also now been replaced lol with a nice new redtop lol to match the seats.The cage is a billet alloy cage built just to fit the battery, you can buy simalair on ebay but the quality isnt the same.
now the intercooler had to be powdercoated to match the pipework
[Image: 009-9.jpg]

i also ended up spraying the centre black as it looked so much newer and nicer
Carrying on the red theme i sent my seat belts away to be rewebbed and they came back looking awesome
[Image: 001-13.jpg]

blueangel

08-12-2018, 02:59 PM #21

Next due to the size of the headlights i had a little relocation job to do
[Image: 009-8.jpg]
This battery has also now been replaced lol with a nice new redtop lol to match the seats.The cage is a billet alloy cage built just to fit the battery, you can buy simalair on ebay but the quality isnt the same.
now the intercooler had to be powdercoated to match the pipework
[Image: 009-9.jpg]
[Image: 010-7.jpg]
i also ended up spraying the centre black as it looked so much newer and nicer
Carrying on the red theme i sent my seat belts away to be rewebbed and they came back looking awesome
[Image: 001-13.jpg]

blueangel
Junior Member

08-12-2018, 03:02 PM

#22

Now for some work on the front bumper as the headlight recesses were wrong now and also the sides were very wrong for the wide wings in shape and curve.
[Image: 006-13.jpg]

Then it was thge first part of the car to receive a real coat of paint
[Image: 010-8.jpg]

blueangel

08-12-2018, 03:02 PM #22

Now for some work on the front bumper as the headlight recesses were wrong now and also the sides were very wrong for the wide wings in shape and curve.
[Image: 006-13.jpg]
[Image: 007-14.jpg]
[Image: 005-13.jpg]
Then it was thge first part of the car to receive a real coat of paint
[Image: 010-8.jpg]
[Image: 008-14.jpg]
[Image: 009-10.jpg]

blueangel
Junior Member

08-12-2018, 03:11 PM

#23

Next was the turn of the bonnet
[Image: 034.jpg]

next the catches were put on to help secure the bonnet
Then it was sprayed
[Image: 004-14.jpg]

finally my car was beginig to take a serious shape

blueangel

08-12-2018, 03:11 PM #23

Next was the turn of the bonnet
[Image: 034.jpg]
[Image: 023-2.jpg]
[Image: 025-1.jpg]
[Image: 024-2.jpg]
[Image: 036.jpg]
[Image: 037.jpg]
[Image: 030-1.jpg]
next the catches were put on to help secure the bonnet
Then it was sprayed
[Image: 004-14.jpg]
[Image: 003-15.jpg]
[Image: 002-15.jpg]
finally my car was beginig to take a serious shape

blueangel
Junior Member

08-12-2018, 03:13 PM

#24

now id got it to this stage i thought right lets take it outside give it a clean
[Image: 006-15.jpg]

here was my first view of what the car was gonna look like

blueangel

08-12-2018, 03:13 PM #24

now id got it to this stage i thought right lets take it outside give it a clean
[Image: 006-15.jpg]
[Image: 005-16.jpg]
here was my first view of what the car was gonna look like

blueangel
Junior Member

08-12-2018, 03:19 PM

#25

Ok next id sourced a carbon lip ridox copy spoiler from Keron but it wasnt exactly what i wanted so aswith everything else i thought sod it mod it
[Image: 024-3.jpg]

Now i did get a little bit of help from two good mates for the finishing stages
lewis and dave spent a few nights working with me sorting out some of the final stages
[Image: 014-2.jpg]

the doors were smoothed over for the 4th generation of mirrors
[Image: 018-3.jpg]

the tailgate was smoothed over removing the badges and the rear brake light
then the wiper hole was welded over too
[Image: 017-2.jpg]

blueangel

08-12-2018, 03:19 PM #25

Ok next id sourced a carbon lip ridox copy spoiler from Keron but it wasnt exactly what i wanted so aswith everything else i thought sod it mod it
[Image: 024-3.jpg]
[Image: 021-3.jpg]
[Image: 026-2.jpg]
Now i did get a little bit of help from two good mates for the finishing stages
lewis and dave spent a few nights working with me sorting out some of the final stages
[Image: 014-2.jpg]
[Image: 022-3.jpg]
the doors were smoothed over for the 4th generation of mirrors
[Image: 018-3.jpg]
[Image: 016-1.jpg]
the tailgate was smoothed over removing the badges and the rear brake light
then the wiper hole was welded over too
[Image: 017-2.jpg]

blueangel
Junior Member

08-12-2018, 03:22 PM

#26

lots went on at this stage and i have hundreds of photos but the next stage was more fun i got to paint my first car and also use a spraygun on my compressor lol.
So the next session was to mask the whole car off ready to be sprayed.
this is Dave lol
[Image: 039.jpg]

myself and stu, stu being the bald one lol
[Image: 034-1.jpg]

Lewis Dave and Stu
[Image: 029-2.jpg]

blueangel

08-12-2018, 03:22 PM #26

blueangel
Junior Member

08-12-2018, 03:28 PM

#27

Now the spraying begins
[Image: 045.jpg]

first couple of coats of primer so we took it outside to flat it back and stopper the tiny holes

blueangel

08-12-2018, 03:28 PM #27

Now the spraying begins
[Image: 045.jpg]
[Image: 043.jpg]
[Image: 041.jpg]
[Image: 017-4.jpg]
[Image: 005-18.jpg]
[Image: 004-17.jpg]
[Image: 006-17.jpg]
[Image: 014-4.jpg]
[Image: 013-5.jpg]
[Image: 011-6.jpg]
first couple of coats of primer so we took it outside to flat it back and stopper the tiny holes

blueangel
Junior Member

08-12-2018, 03:33 PM

#28

next another few coats of white primer then the ground coat in white also
[Image: 36003_444955740148_587245148_634539.jpg]

[Image: 36003_444955745148_587245148_634539.jpg]

[Image: 36003_444955755148_587245148_634539.jpg]

[Image: 36003_444955765148_587245148_634539.jpg]

[Image: 37215_444956110148_587245148_634540.jpg]

[Image: 36003_444955760148_587245148_634539.jpg]

[Image: 36003_444955750148_587245148_634539.jpg]

[Image: 34599_444956565148_587245148_634543.jpg]

[Image: 36003_444955730148_587245148_634538.jpg]

[Image: 37215_444956115148_587245148_634540.jpg]

[Image: 34599_444956550148_587245148_634543.jpg]

[Image: 37215_444956130148_587245148_634540.jpg]

blueangel

08-12-2018, 03:33 PM #28

[Image: 009-12.jpg]
[Image: 008-16.jpg]
[Image: 007-17.jpg]
[Image: 012-7.jpg]
[Image: 003-17.jpg]
next another few coats of white primer then the ground coat in white also
[Image: 36003_444955740148_587245148_634539.jpg]
[Image: 36003_444955745148_587245148_634539.jpg]
[Image: 36003_444955755148_587245148_634539.jpg]
[Image: 36003_444955765148_587245148_634539.jpg]
[Image: 37215_444956110148_587245148_634540.jpg]
[Image: 36003_444955760148_587245148_634539.jpg]
[Image: 36003_444955750148_587245148_634539.jpg]
[Image: 34599_444956565148_587245148_634543.jpg]
[Image: 36003_444955730148_587245148_634538.jpg]
[Image: 37215_444956115148_587245148_634540.jpg]
[Image: 34599_444956550148_587245148_634543.jpg]
[Image: 37215_444956130148_587245148_634540.jpg]

blueangel
Junior Member

08-12-2018, 03:36 PM

#29

After 6 coats of laquer we dropped the car off the stands and rolled it out
[Image: 36415_410018697135_616562135_503309.jpg]

[Image: 34444_410018117135_616562135_503308.jpg]

[Image: 36864_410020367135_616562135_503315.jpg]

[Image: 36008_410019427135_616562135_503313.jpg]

[Image: 35828_410019662135_616562135_503314.jpg]

this was the first real look at what i was building coming together

blueangel

08-12-2018, 03:36 PM #29

After 6 coats of laquer we dropped the car off the stands and rolled it out
[Image: 36415_410018697135_616562135_503309.jpg]
[Image: 34444_410018117135_616562135_503308.jpg]
[Image: 36864_410020367135_616562135_503315.jpg]
[Image: 36008_410019427135_616562135_503313.jpg]
[Image: 35828_410019662135_616562135_503314.jpg]
this was the first real look at what i was building coming together