would this have enough tourq to open my crank bolt
would this have enough tourq to open my crank bolt
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
01-09-2017, 06:26 AM #31Scrap the car ? Why, what's wrong with it ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
![[Image: 21072009421.jpg]](http://ibrar.co.uk/3d/Lexus/21072009421.jpg)
I was involved in a frontal.
I have stripped all the broken bits off..
damage is superficial as the car dipped when it hit the transit van which decided to jump into my lane on the motorway and brake hard.
I needed
1x bonnet
1x bumper
1x radiator support
2x r and l headlight support
1x radiator
1x aircon radiator
2x bumper pads
I have managed to repair and straighten the wings the were only bent from the front.
Both of the car legs look straight and are not dipped down or to anyside.
I am depressed, I dont have any tools to rip the engine/gearbox off and its alot of work.
I have bought all the parts needed for repair this has been holding me up for a while
I was involved in a frontal.
I have stripped all the broken bits off..
damage is superficial as the car dipped when it hit the transit van which decided to jump into my lane on the motorway and brake hard.
I needed
1x bonnet
1x bumper
1x radiator support
2x r and l headlight support
1x radiator
1x aircon radiator
2x bumper pads
I have managed to repair and straighten the wings the were only bent from the front.
Both of the car legs look straight and are not dipped down or to anyside.
I am depressed, I dont have any tools to rip the engine/gearbox off and its alot of work.
I have bought all the parts needed for repair this has been holding me up for a while
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
01-09-2017, 06:53 AM #34Sorry to see that pic Ibby, even though it's repairable I don't like to see a car in that state :crying:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
ibby Nope...
the compressor I bought doesnt reach max pressure
so the airgun turns slowly!
What do you mean by doesn't reach max pressure? Is the compressor faulty or have you not bought one with a large enough CFM rating for your impact gun? (presume you mean impact gun by 'airgun'?)
russelllinn
02-09-2017, 06:05 PM #38ibby Nope...
the compressor I bought doesnt reach max pressure
so the airgun turns slowly!
What do you mean by doesn't reach max pressure? Is the compressor faulty or have you not bought one with a large enough CFM rating for your impact gun? (presume you mean impact gun by 'airgun'?)
The compressor is faulty
I bought a good working one from ebay
But the scammer from ebay sold me a faulty one...
It builds only about 3 bar..and stops, it has a leak on the piston.
the airgun i bought needs 5psi...to make 240lb of tourqe.
and only found out today the compressor parts are not avalible
yes
The compressor is faulty
I bought a good working one from ebay
But the scammer from ebay sold me a faulty one...
It builds only about 3 bar..and stops, it has a leak on the piston.
the airgun i bought needs 5psi...to make 240lb of tourqe.
and only found out today the compressor parts are not avalible
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
03-09-2017, 04:59 AM #40Have you gone back to the eBay seller about what you've bought ? Can you not open a dispute on it ? I realise that doesn't help you straight away though :thumbdown:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
1 Guest(s)
1 Guest(s)
Views 629
Last Post by
Views 1,224
Last Post by
Views 926
Last Post by