JapCarForum Cars, Cars, Cars! Project Cars Dave's IS200 Sport

Dave's IS200 Sport

Dave's IS200 Sport

Pages (45): Previous 16 7 8 9 1045 Next  
ae86 = is 200
Junior Member
27
27-10-2018, 07:10 PM
#71
were did you get the badge for your steering wheel is it a badge for the back of the car normaly? if so looks like good idea might do this to my car.just sticks on huh? look s cool too:biggrin:
ae86 = is 200
27-10-2018, 07:10 PM #71

were did you get the badge for your steering wheel is it a badge for the back of the car normaly? if so looks like good idea might do this to my car.just sticks on huh? look s cool too:biggrin:

Dark Samurai
Posting Freak
4,957
27-10-2018, 07:14 PM
#72
off the airbox in engine bay matey
and yeah just sticks i believe?

Lexus IS300 Sportcross in Platinum Ice.
Click here for garage.

PSN ID: O3107 
Dark Samurai
27-10-2018, 07:14 PM #72

off the airbox in engine bay matey
and yeah just sticks i believe?


Lexus IS300 Sportcross in Platinum Ice.
Click here for garage.

PSN ID: O3107 

DaveEdin
Posting Freak
5,657
27-10-2018, 08:27 PM
#73
ormi hi mate,i will fit all that stuff for you i forgot,the boss was having a hissy fit on homers to many getting done(not by me i dont do them)
just need to talk him round again..lol..
im on jury dutie for i think 10-20 days very nasty case and im not enjoying it one bit..
i can do the brakes at the house no problem...roll bars i will do at work..
what else you got.......anything but electrics...lol...

That's all I got mate, would welcome your assistance in fitting! Brakes, ARBs (And MoleyBars), sills, stereo and wheels. I'm confident about managing to fit the wheels :lol: but I'm going to hold off on those until the snow's gone, for obvious reasons. Think I have the same stereo as you now? Still waiting for the bypass cable to arrive, but I think I might manage that myself with the walkthroughs on here.

The sills, I might just grab an auto electrician to fit them for me, electrics make me nervous unless they end in a plug I can stick in a socket! Tapping a wire sounds hard...

If you let me know when's good for you, I'll work around your availability - the favour's much appreciated matey Big Grin

I take it you can't go into detail on the case you're involved in?

Moley How about doing my timing belt and water pump sometime next year Ormi ??

Would give me an excuse for a day out , and could meet up with Dave and Asi

Sounds like a plan to me Moley...

ae86 = is 200 were did you get the badge for your steering wheel is it a badge for the back of the car normaly? if so looks like good idea might do this to my car.just sticks on huh? look s cool too:biggrin:

It came straight off the airbox in the engine bay matey (as Oli said), in my case it was a tiny bit too big for the space on the steering wheel, so I ran a wee file round the edge to make it fit. A spot of sticky pads on the back to fix it in place. The original steering wheel emblem I stuck on the space on the airbox :wink:
DaveEdin
27-10-2018, 08:27 PM #73

ormi hi mate,i will fit all that stuff for you i forgot,the boss was having a hissy fit on homers to many getting done(not by me i dont do them)
just need to talk him round again..lol..
im on jury dutie for i think 10-20 days very nasty case and im not enjoying it one bit..
i can do the brakes at the house no problem...roll bars i will do at work..
what else you got.......anything but electrics...lol...

That's all I got mate, would welcome your assistance in fitting! Brakes, ARBs (And MoleyBars), sills, stereo and wheels. I'm confident about managing to fit the wheels :lol: but I'm going to hold off on those until the snow's gone, for obvious reasons. Think I have the same stereo as you now? Still waiting for the bypass cable to arrive, but I think I might manage that myself with the walkthroughs on here.

The sills, I might just grab an auto electrician to fit them for me, electrics make me nervous unless they end in a plug I can stick in a socket! Tapping a wire sounds hard...

If you let me know when's good for you, I'll work around your availability - the favour's much appreciated matey Big Grin

I take it you can't go into detail on the case you're involved in?

Moley How about doing my timing belt and water pump sometime next year Ormi ??

Would give me an excuse for a day out , and could meet up with Dave and Asi

Sounds like a plan to me Moley...

ae86 = is 200 were did you get the badge for your steering wheel is it a badge for the back of the car normaly? if so looks like good idea might do this to my car.just sticks on huh? look s cool too:biggrin:

It came straight off the airbox in the engine bay matey (as Oli said), in my case it was a tiny bit too big for the space on the steering wheel, so I ran a wee file round the edge to make it fit. A spot of sticky pads on the back to fix it in place. The original steering wheel emblem I stuck on the space on the airbox :wink:

Lexuspat
Administrator
6,827
27-10-2018, 11:02 PM
#74
dave some nice bits there mate

most of the things you have there are fairly easy to do but always best if ur not 100% to get someone else to do it

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
27-10-2018, 11:02 PM #74

dave some nice bits there mate

most of the things you have there are fairly easy to do but always best if ur not 100% to get someone else to do it


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

ormi
Posting Freak
3,006
28-10-2018, 03:04 PM
#75
not yet mate but i will fill you's in once its over as it is a big case..

[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ormi
28-10-2018, 03:04 PM #75

not yet mate but i will fill you's in once its over as it is a big case..


[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

DaveEdin
Posting Freak
5,657
28-10-2018, 04:16 PM
#76
Is it the Sheridan rubbish? :lol: I know, you're not allowed to say... but I'm gonna guess anyway Big Grin
DaveEdin
28-10-2018, 04:16 PM #76

Is it the Sheridan rubbish? :lol: I know, you're not allowed to say... but I'm gonna guess anyway Big Grin

ormi
Posting Freak
3,006
28-10-2018, 04:26 PM
#77
no mate to be honest in the 30 years i have lived i must have had my eyes wide shut........i didnt know people like this existed.........

[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ormi
28-10-2018, 04:26 PM #77

no mate to be honest in the 30 years i have lived i must have had my eyes wide shut........i didnt know people like this existed.........


[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

FirebirdPhil
Posting Freak
7,101
28-10-2018, 04:39 PM
#78
ormi no mate to be honest in the 30 years i have lived i must have had my eyes wide shut........i didnt know people like this existed.........

Funny thats what my dad has been saying. he has just finished jury service.

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
28-10-2018, 04:39 PM #78

ormi no mate to be honest in the 30 years i have lived i must have had my eyes wide shut........i didnt know people like this existed.........

Funny thats what my dad has been saying. he has just finished jury service.


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

ormi
Posting Freak
3,006
04-12-2018, 03:11 PM
#79
well i just thought i'd add this
daves yellow trd bars and drilled and grooved disks
[Image: img2733zu.jpg]
daves matching rears
[Image: img2737f.jpg]
rear trd yellow roll bar and moleys ultras bars
[Image: img2742m.jpg]
didnt go all to plan yip all the rear antiroll bar bolts snapped nothing a drill didnt sort out..
took a few more pointless pics
[Image: img2743y.jpg]
[Image: img2744g.jpg]
[Image: img2745g.jpg]
[Image: img2747g.jpg]

[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ormi
04-12-2018, 03:11 PM #79

well i just thought i'd add this
daves yellow trd bars and drilled and grooved disks
[Image: img2733zu.jpg]
daves matching rears
[Image: img2737f.jpg]
rear trd yellow roll bar and moleys ultras bars
[Image: img2742m.jpg]
didnt go all to plan yip all the rear antiroll bar bolts snapped nothing a drill didnt sort out..
took a few more pointless pics
[Image: img2743y.jpg]
[Image: img2744g.jpg]
[Image: img2745g.jpg]
[Image: img2747g.jpg]


[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

Sparkystav
Administrator
14,683
04-12-2018, 03:12 PM
#80
Very shiny!

OutlawJapClub Admin Team
Sparkystav
04-12-2018, 03:12 PM #80

Very shiny!


OutlawJapClub Admin Team

Pages (45): Previous 16 7 8 9 1045 Next  
Recently Browsing
 2 Guest(s)
Recently Browsing
 2 Guest(s)
Related Threads…
Replies 91
Views 7,762
09-04-2025, 06:58 AM
Last Post by Sparkystav
Replies 21
Views 2,035
06-04-2025, 11:45 PM
Last Post by Lexuspat
Replies 1,312
Views 122,363
25-03-2025, 07:58 AM
Last Post by ZAIS200
Replies 194
Views 12,789
23-03-2025, 09:34 PM
Last Post by Wayne
Replies 414
Views 28,252
18-02-2025, 05:31 AM
Last Post by is200turbo
Replies 1,341
Views 87,714
07-02-2025, 07:41 AM
Last Post by Wayne
Replies 4
Views 644
17-12-2024, 08:44 AM
Last Post by Rabster
Replies 20
Views 1,993
07-10-2024, 09:48 AM
Last Post by Wayne
Replies 42
Views 4,052
03-10-2024, 09:41 PM
Last Post by Wayne
Replies 28
Views 2,734
16-05-2024, 05:14 PM
Last Post by IS200_rider