SPC Horsham Project IS 550
SPC Horsham Project IS 550
01-07-2017, 10:59 AM
Lexusboy Supratruck,
Are you bring a Jap vehicle for the club stand and are you camping?
I need this confirmed because of numbers.
I have added your name to the list.:thumbup1:
I wont be camping so just the stand pl :thumbup1:
supratruck
01-07-2017, 10:59 AM #51Lexusboy Supratruck,
Are you bring a Jap vehicle for the club stand and are you camping?
I need this confirmed because of numbers.
I have added your name to the list.:thumbup1:
I wont be camping so just the stand pl :thumbup1:
01-07-2017, 03:25 PM
steviewevie Which GT30 is it exactly ?
Why the pressure regulator for the injectors ? So will you make sure you change the injectors before they max out ?
Sorry for all the questions, but please take it as a compliment that I'm very interested to hear how you get on, as I'm sure are lots of other folks here ! :biggrin:
The fuel pressure reg gives us a bit more of a margin with the std injectors
SPChorsham.com
01-07-2017, 03:25 PM #53steviewevie Which GT30 is it exactly ?
Why the pressure regulator for the injectors ? So will you make sure you change the injectors before they max out ?
Sorry for all the questions, but please take it as a compliment that I'm very interested to hear how you get on, as I'm sure are lots of other folks here ! :biggrin:
The fuel pressure reg gives us a bit more of a margin with the std injectors
02-07-2017, 09:12 AM
OEM manifold still in place :
![[Image: IMG_8017Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8017Small.jpg)
New turbo manifold :
![[Image: IMG_8020Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8020Small.jpg)
GT30 turbo :
![[Image: IMG_8022Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8022Small.jpg)
OEM exhaust system still in place :
![[Image: IMG_8014Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8014Small.jpg)
OEM cat alongside new decat pipe :
![[Image: IMG_8033Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8033Small.jpg)
Decat pipe installed :
![[Image: IMG_8029Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8029Small.jpg)
Start of 3" downpipe :
![[Image: IMG_8024Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8024Small.jpg)
Next stage of downpipe :
![[Image: IMG_8028Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8028Small.jpg)
Downpipe completed :
![[Image: IMG_8038Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8038Small.jpg)
Flexi joint :
![[Image: IMG_8032Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8032Small.jpg)
Downpipe with open wastegate :
![[Image: IMG_8039Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8039Small.jpg)
Wastegate pipe and flexi joint :
![[Image: IMG_8042Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8042Small.jpg)
Electrics heat-wrapped :
![[Image: IMG_8036Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8036Small.jpg)
Exhaust brace for support :
![[Image: IMG_8040Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8040Small.jpg)
![[Image: RIMG0905.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/RIMG0905.jpg)
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
02-07-2017, 09:12 AM #54Some more pics, courtesy of SPC Horsham.
OEM manifold still in place :
New turbo manifold :
GT30 turbo :
OEM exhaust system still in place :
OEM cat alongside new decat pipe :
Decat pipe installed :
Start of 3" downpipe :
Next stage of downpipe :
Downpipe completed :
Flexi joint :
Downpipe with open wastegate :
Wastegate pipe and flexi joint :
Electrics heat-wrapped :
Exhaust brace for support :
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
02-07-2017, 09:18 AM
![[Image: IS200INLET026.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IS200INLET026.jpg)
![[Image: IS200INLET028.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IS200INLET028.jpg)
![[Image: IS200INLET031.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IS200INLET031.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
02-07-2017, 09:18 AM #55Some pictures of the inlet manifold that SPC Horsham are in the process of making.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
02-07-2017, 09:25 AM
![[Image: IMG_7993Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_7993Small.jpg)
![[Image: IMG_7994Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_7994Small.jpg)
Bored and decked :
![[Image: IMG_7995Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_7995Small.jpg)
New bearing shells in place :
![[Image: IMG_7998Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_7998Small.jpg)
Installing new ARP main bolts :
![[Image: IMG_7999Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_7999Small.jpg)
Crankshaft in place :
![[Image: IMG_8000Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8000Small.jpg)
Forged pistons installed :
![[Image: IMG_8002Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8002Small.jpg)
Forged conrods and pistons installed :
![[Image: IMG_8003Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8003Small.jpg)
Front cover and new water pump installed :
![[Image: IMG_8004Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8004Small.jpg)
Large capacity sump with turbo return fitting :
![[Image: IMG_8007Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8007Small.jpg)
Rear main seal in place :
![[Image: IMG_8008Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8008Small.jpg)
Girdle plate :
![[Image: IMG_8009Small.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_8009Small.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
02-07-2017, 09:25 AM #56Pics of work being done on a new engine block for Dave Read's car.
Bored and decked :
New bearing shells in place :
Installing new ARP main bolts :
Crankshaft in place :
Forged pistons installed :
Forged conrods and pistons installed :
Front cover and new water pump installed :
Large capacity sump with turbo return fitting :
Rear main seal in place :
Girdle plate :
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
02-07-2017, 09:27 AM
ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers
aaronabbott
02-07-2017, 09:27 AM #57im still waiting on a price so i can get mine done:drool:
ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers
02-07-2017, 09:39 AM
aaronabbott im still waiting on a price so i can get mine done:drool:
We're very pleased to be able to now welcome on board SPC Horsham as an authorised trader (their forum etc will be coming very soon). So now they're free to talk to you about prices etc, although bear in mind this is their test car, so rolling this out for members might be a different thing and they may or may not be ready to talk about pricing at this stage.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
02-07-2017, 09:39 AM #58aaronabbott im still waiting on a price so i can get mine done:drool:
We're very pleased to be able to now welcome on board SPC Horsham as an authorised trader (their forum etc will be coming very soon). So now they're free to talk to you about prices etc, although bear in mind this is their test car, so rolling this out for members might be a different thing and they may or may not be ready to talk about pricing at this stage.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
02-07-2017, 10:00 AM
kids these days are getting smarter and smarter :p
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
02-07-2017, 10:00 AM #59looks awesome, i see Dave's car is being looked after in the hands of a 12 year old kids these days are getting smarter and smarter :p
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 5
Views 853
Views 853
21-05-2024, 04:24 AM
Last Post byFOSSIL FUELS
Last Post by
Replies 362
Views 35,287
Views 35,287
06-08-2023, 02:50 PM
Last Post byjohn wan
Last Post by
Replies 1,318
Views 106,186
Views 106,186
05-06-2023, 02:12 PM
Last Post bysarah0
Last Post by
Replies 509
Views 50,208
Views 50,208
02-03-2023, 09:24 PM
Last Post byRabster
Last Post by