Dave's IS200 Sport
Dave's IS200 Sport
Gord Looks nice mate :thumbup:
Cheers Gord
dimis Looks nice mate!! You need indeed a new bigger back boxAm working on it as we speak bud... :biggrin:
On a similar note, I had a good look at the apexi exhaust Ormi got from Rabs and it's ****** huuuuuuuuuuuge! I could have practically crawled up the darn thing (and probably found a few lost tribes in there while I was at it)
I was out earlier on and found myself popping the boot a couple times. I had nothing to go in there, but it used to unlock and that was it really. Now it opens all the way up. I guess I'm easily amused... :kiltsmilie::kiltsmilie:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Gord Looks nice mate :thumbup:
Cheers Gord
dimis Looks nice mate!! You need indeed a new bigger back boxAm working on it as we speak bud... :biggrin:
On a similar note, I had a good look at the apexi exhaust Ormi got from Rabs and it's ****** huuuuuuuuuuuge! I could have practically crawled up the darn thing (and probably found a few lost tribes in there while I was at it)
I was out earlier on and found myself popping the boot a couple times. I had nothing to go in there, but it used to unlock and that was it really. Now it opens all the way up. I guess I'm easily amused... :kiltsmilie::kiltsmilie:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
Lexuspat looks very nice Dave
Cheers matey...
The list of "to-do" gets lower....
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Lexuspat looks very nice Dave
Cheers matey...
The list of "to-do" gets lower....
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
From the stuff I already have, I still have 50mm lowering springs and LED Sills to fit. I have a set of 18" wheels in the garage to be refurbed and fitted. I have Jason's detangoed and black-painted headlights, though he said they needed resealing, so I picked up some silicone sealant on the way home tonight and will look at getting that done and the lights fitted this week.There are a few other things in progress as well, I've got Jason working on what I hope will be a cool little mod for me (and as far as I know nobody else has done this, so I'm keeping my mouth shut on it for now!)
I've been talking to Jay about getting the console lights swapped over on my heater/seat/trc controls to blue so that they match the new stereo buttons, and will do the dash clocks as well when those are done. Jay's doing a set for Moley first though so I'm being patient
Been speaking to Chris (Bandit) about something else too, my fingers and toes are crossed that a deal will be reached there too, just waiting for him to confirm :thumbup:
And after that I might just get a GT-R engine stuffed in there (kidding)
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
From the stuff I already have, I still have 50mm lowering springs and LED Sills to fit. I have a set of 18" wheels in the garage to be refurbed and fitted. I have Jason's detangoed and black-painted headlights, though he said they needed resealing, so I picked up some silicone sealant on the way home tonight and will look at getting that done and the lights fitted this week.
There are a few other things in progress as well, I've got Jason working on what I hope will be a cool little mod for me (and as far as I know nobody else has done this, so I'm keeping my mouth shut on it for now!)
I've been talking to Jay about getting the console lights swapped over on my heater/seat/trc controls to blue so that they match the new stereo buttons, and will do the dash clocks as well when those are done. Jay's doing a set for Moley first though so I'm being patient
Been speaking to Chris (Bandit) about something else too, my fingers and toes are crossed that a deal will be reached there too, just waiting for him to confirm :thumbup:
And after that I might just get a GT-R engine stuffed in there (kidding)
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
You'll have to excuse the pic, my mobile doesn't do great photos :lol: You can hardly see the needles in the pic, but they're actually perfectly visible...
![[Image: IMAG0494.jpg]](http://i919.photobucket.com/albums/ad36/daveplank/IMAG0494.jpg)
Still got to do the ignition barrel and cig lighter lights, but I wasn't sure what size they were. Bandit came to the rescue with the information, so I've ordered the right bulbs for turning those blue too now :thumbup1: Ignition barrel is easy enough but the cig lighter might just be a PITA...
Exhaust puny-ness will be resolved soon, as I bought Bandit's Blueflame exhaust off him :thumbup:
Am spending the evening with the silicone sealant and Jase's headlights, so should be able to look at fitting those tomorrow night (if I have time, anyway!!)
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
In preparation for getting the centre console etc done, I've changed over the dash clocks to blue SMDs from a kit on ebay.
You'll have to excuse the pic, my mobile doesn't do great photos :lol: You can hardly see the needles in the pic, but they're actually perfectly visible...
Still got to do the ignition barrel and cig lighter lights, but I wasn't sure what size they were. Bandit came to the rescue with the information, so I've ordered the right bulbs for turning those blue too now :thumbup1: Ignition barrel is easy enough but the cig lighter might just be a PITA...
Exhaust puny-ness will be resolved soon, as I bought Bandit's Blueflame exhaust off him :thumbup:
Am spending the evening with the silicone sealant and Jase's headlights, so should be able to look at fitting those tomorrow night (if I have time, anyway!!)
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
From the orange:
![[Image: IMAG0497.jpg]](http://i919.photobucket.com/albums/ad36/daveplank/IMAG0497.jpg)
To the blue:
![[Image: IMAG0498.jpg]](http://i919.photobucket.com/albums/ad36/daveplank/IMAG0498.jpg)
Must say the blue clocks are looking great when driving at night
Can't wait to have it all converted, think it'll freshen up the interior nicely :biggrin:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Ignition ring now a nice blue as well
From the orange:
To the blue:
Must say the blue clocks are looking great when driving at night Can't wait to have it all converted, think it'll freshen up the interior nicely :biggrin:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
2 Guest(s)
2 Guest(s)
Views 122,375
Last Post by
Views 87,739
Last Post by
Views 645
Last Post by
Views 2,005
Last Post by
Views 4,055
Last Post by
Views 2,742
Last Post by