Dave's IS200 Sport
Dave's IS200 Sport
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
bring the fog/light/brake conversion too and ill do that
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ormi bring the fog/light/brake conversion too and ill do that
I will do matey, thanks very much!
I need to find some people to rep so I can rep you some more.....James S The car has really come on this year mate.
Looking very good!
Cheers James, I'm loving the differences to the original look myself
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
ormi bring the fog/light/brake conversion too and ill do that
I will do matey, thanks very much!
I need to find some people to rep so I can rep you some more.....James S The car has really come on this year mate.
Looking very good!
Cheers James, I'm loving the differences to the original look myself
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Bandit Coming on very well Dave, time you got that exhaust on though :p:thumbup1:
Oh and i haven't forgot you flyeyes mate, just been very busy :whistling:
Gaskets arrived the other day bud, so going to be getting the exhaust sorted soon
No rush on the flyeyes Chris :thumbup:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Bandit Coming on very well Dave, time you got that exhaust on though :p:thumbup1:
Oh and i haven't forgot you flyeyes mate, just been very busy :whistling:
Gaskets arrived the other day bud, so going to be getting the exhaust sorted soon
No rush on the flyeyes Chris :thumbup:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
hock:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Hopefully not today, since the car had better still be in the car park outside the office in Livingston!! hock:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Went out to ormi's last night to see about the fog/brake/quad light conversion and fit the wee brackets he made up for the side skirts :thumbup:
Perfect fit, and the side skirts are now 100% tightly fitted and snug
Wee issue with the fog/brake/quad conversion though! The Fog/Brake bit worked just fine, but when ormi added the fogs as tail lights it popped a fuse. So it was replaced, and that went as well... Changed it again and it didn't go. But the tail lights weren't getting any power? Brakes, headlights, indicators, fogs - all were fine. Everything except the tail lights! Nothing we (ormi) did seemed to make the tail lights work, and the "blown bulb" warning wasn't showing up on the dash either!
So all the conversion got stripped back out, and the original setup reinstated. Still no tail lights! Everything else working though! Very odd.
In the end, ormi took a feed from the numberplate light, and got the tail lights working using that, since it seemed that it was just the tail lights that weren't getting the power...
Muchly confused about this one... further investigation required before the conversion is retried! oh and the flipping tail lights decided to stop working this evening as well - only this time the "blown bulb" warning light is actually on...
:confused1: :confused1: :confused1:
Anyone got any ideas?
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Sorry bud, my car spent the day in Livingston with me... If you do spot me though, gimme a toot on the horn
Went out to ormi's last night to see about the fog/brake/quad light conversion and fit the wee brackets he made up for the side skirts :thumbup:
Perfect fit, and the side skirts are now 100% tightly fitted and snug
Wee issue with the fog/brake/quad conversion though! The Fog/Brake bit worked just fine, but when ormi added the fogs as tail lights it popped a fuse. So it was replaced, and that went as well... Changed it again and it didn't go. But the tail lights weren't getting any power? Brakes, headlights, indicators, fogs - all were fine. Everything except the tail lights! Nothing we (ormi) did seemed to make the tail lights work, and the "blown bulb" warning wasn't showing up on the dash either!
So all the conversion got stripped back out, and the original setup reinstated. Still no tail lights! Everything else working though! Very odd.
In the end, ormi took a feed from the numberplate light, and got the tail lights working using that, since it seemed that it was just the tail lights that weren't getting the power...
Muchly confused about this one... further investigation required before the conversion is retried! oh and the flipping tail lights decided to stop working this evening as well - only this time the "blown bulb" warning light is actually on...
:confused1: :confused1: :confused1:
Anyone got any ideas?
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Last night did the rear light to fog job. Now this didn't go right first time but is all working fine now. I took the feeds for rear light from the number plate light connections.
Now I don't whether you got your bulb holders from eBay like me but the first thing I had to do was work out which wire on the new bulb holder I had to connect to which wire in the car. The colours of the 3 wires on the new holders don't obviously match up with the colour code in the car. I did the first one and connected it in but I had the feeds from the fog and the rear light crossed and it did some weird things. I quickly worked out what was wrong and it was soon sorted. I don't know whether this was what you did with yours Dave.
Anyway if you have used the same holders as me I can tell you the wires colours.
I did my brake to fog conversion Wednesday evening and everything working fine. I did it a little bit different though in that I took the brake light feed from the feed to my brake light in the boot spoiler. This enabled me to do nearly all the wiring in the boot lid.
Last night did the rear light to fog job. Now this didn't go right first time but is all working fine now. I took the feeds for rear light from the number plate light connections.
Now I don't whether you got your bulb holders from eBay like me but the first thing I had to do was work out which wire on the new bulb holder I had to connect to which wire in the car. The colours of the 3 wires on the new holders don't obviously match up with the colour code in the car. I did the first one and connected it in but I had the feeds from the fog and the rear light crossed and it did some weird things. I quickly worked out what was wrong and it was soon sorted. I don't know whether this was what you did with yours Dave.
Anyway if you have used the same holders as me I can tell you the wires colours.
4 Guest(s)
4 Guest(s)
Views 122,374
Last Post by
Views 87,732
Last Post by
Views 645
Last Post by
Views 2,003
Last Post by
Views 4,055
Last Post by
Views 2,741
Last Post by