IS200 Using Amp Bypass Lead-Lost power to pop up sat nav
IS200 Using Amp Bypass Lead-Lost power to pop up sat nav
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Mine just uses 2 wires from the box mate, they connect to one of the oem connector blocks that come out of the original stereo unit, IIRC its the smaller plug of the 2 that you take out, and both wires for the nav unit push into the one end of it? my sound works fine with it...:thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Cheers and sorry to the OP for hijacking your thread!!
speedfreek
31-05-2019, 03:42 AM #22Gotcha, I think I've got the right idea then. Will give it a bash and let you know how it goes.
Cheers and sorry to the OP for hijacking your thread!!
[SIZE=3]'93 Mazda Eunos Roadster Turbo[/SIZE]
(Current project)
roadrunner
04-06-2019, 02:49 AM #23Hi Speedfreek, Was intending to have a go at wiring in 2 diodes and a resistor this weekend to get my sat nav up and running again but after doing a recap on the threads again, it does not appear as clear to me in what to connect to simply because of the the 2-3 choices. I don't mind which way to do it and i will even destroy my oem dd to do it if need be. on one thread it says to connect to tx+ tx- ground which is easy but he also says connect to bu! what is the bu wire? Also do i have to connect to speaker wires aswell? I know you were going to have a go yourself. When you do and if it is a success, please let me know the exact connections simplyfied by colour of wires and which plug/plugs to tap into. Cheers mate
I just need the diodes to be delivered and I can make them up.
speedfreek
04-06-2019, 07:49 AM #24No worries mate, I will take pics for you along the way.
I just need the diodes to be delivered and I can make them up.
I have enough components to make 9 more kits so if anyone wants one I will make them up and send them out for free.
Pm me if you want one.
speedfreek
25-06-2019, 08:31 AM #26All sorted and installed today. Worked first time and the sound worked too with no fettling - though not sure if it was supposed to!
I have enough components to make 9 more kits so if anyone wants one I will make them up and send them out for free.
Pm me if you want one.
[SIZE=3]'93 Mazda Eunos Roadster Turbo[/SIZE]
(Current project)
Anyway i will have one off you if you still have any left from the 9 available. If you do need any money for postage then let me know. I will see how to pm you and give you my address. I never did try to get my sat nav going as i have been so busy at work and to be honest, I wasn't as confident as you.:thumbup1:
[SIGPIC][/SIGPIC]
roadrunner
26-06-2019, 02:51 AM #27Well done Speedfreek. I am very impressed, and even more impressed to see you offering help for free. It is so refreshing to find a forum with alot of decent folk.
Anyway i will have one off you if you still have any left from the 9 available. If you do need any money for postage then let me know. I will see how to pm you and give you my address. I never did try to get my sat nav going as i have been so busy at work and to be honest, I wasn't as confident as you.:thumbup1:
[SIGPIC][/SIGPIC]
speedfreek
26-06-2019, 03:20 AM #28No monies needed for post - it's only a couple of pence
Happy to help
It's going to take a couple of days for the little boxes to arrive so the kits are presentable. My prototype that I have in my car is a bit shite as it's just components soldered together and insulated - so not really appropriate for other peeps!
Incidentally - how much were these being sold for before? If it's anymore than a tenner (half to cover components and postage and half for time) then it was a complete rip off!
speedfreek
26-06-2019, 06:24 PM #29Just to add I now have enough for 8 kits now.
It's going to take a couple of days for the little boxes to arrive so the kits are presentable. My prototype that I have in my car is a bit shite as it's just components soldered together and insulated - so not really appropriate for other peeps!
Incidentally - how much were these being sold for before? If it's anymore than a tenner (half to cover components and postage and half for time) then it was a complete rip off!
Well done for getting these kits made, +rep! A lot of people will be appreciative.
Dark Samurai
26-06-2019, 06:30 PM #30They were about 20 quid matey. I think.
Well done for getting these kits made, +rep! A lot of people will be appreciative.
1 Guest(s)
1 Guest(s)
Views 150
Last Post by
Views 2,069
Last Post by
Views 1,030
Last Post by
Views 724
Last Post by
Views 20,533
Last Post by
Views 1,762
Last Post by
Views 2,670
Last Post by
Views 890
Last Post by