Lexus IS200 Turbo - Adding a personal touch
Lexus IS200 Turbo - Adding a personal touch
Just phoned Lexus, with my "staff" discount I can get a set of 04 onwards headlights for £250. hmmm, decisions - plus if I can shift the current set that would help leverage some of the cost.
IS200 Turbo for sale - http://www.outlawjapclub.co.uk/forum/sho...php?t=9945
mattross1313
27-06-2019, 11:04 AM #31that would just about do it Toxo hehe. I also just found that toyodiy.com list Lexus parts
Just phoned Lexus, with my "staff" discount I can get a set of 04 onwards headlights for £250. hmmm, decisions - plus if I can shift the current set that would help leverage some of the cost.
IS200 Turbo for sale - http://www.outlawjapclub.co.uk/forum/sho...php?t=9945
Might not be to everyone's taste, but hey that's what it's all about. I picked up a new IS200 badge on eBay as it cost a few quid less than from lexus. I then bought a few random car badges trying to find the right one for my plan. In the end I used part of a CDTI badge.....
Is afternoon I masked around the standard badge so I knew how much room I had to work with and set to work with. My dental floss to remove the old badge. Once the pain underneath was cleaned up and polished I re applied the new badge, but put each letter and the 200 closer together. This left with a bit of room at the end of the masked off area for a 'T'.
I am pleased with it, its rather subtle which helps keep the sleeper look I am aiming for. Plus it doesn't intrude on the standard spacing on the boot line.
![[Image: 231f133a.jpg]](http://i203.photobucket.com/albums/aa181/mattross1313/Penny/231f133a.jpg)
![[Image: e9e47b4f.jpg]](http://i203.photobucket.com/albums/aa181/mattross1313/Penny/e9e47b4f.jpg)
![[Image: 25984568.jpg]](http://i203.photobucket.com/albums/aa181/mattross1313/Penny/25984568.jpg)
Matt
IS200 Turbo for sale - http://www.outlawjapclub.co.uk/forum/sho...php?t=9945
mattross1313
02-07-2019, 02:37 PM #33Update - I completed my first mod today! :thumbup1:
Might not be to everyone's taste, but hey that's what it's all about. I picked up a new IS200 badge on eBay as it cost a few quid less than from lexus. I then bought a few random car badges trying to find the right one for my plan. In the end I used part of a CDTI badge.....
Is afternoon I masked around the standard badge so I knew how much room I had to work with and set to work with. My dental floss to remove the old badge. Once the pain underneath was cleaned up and polished I re applied the new badge, but put each letter and the 200 closer together. This left with a bit of room at the end of the masked off area for a 'T'.
I am pleased with it, its rather subtle which helps keep the sleeper look I am aiming for. Plus it doesn't intrude on the standard spacing on the boot line.
Matt
IS200 Turbo for sale - http://www.outlawjapclub.co.uk/forum/sho...php?t=9945
In the end went to Vinyl badge so i could have "Turbo" in the lexus font.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
02-07-2019, 04:12 PM #34Must admit its not my cup of tea, but i had the same problem with my car.
In the end went to Vinyl badge so i could have "Turbo" in the lexus font.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
03-07-2019, 12:14 AM #36I like it a lot. But I am slowly begining to like American cars....................... Oh the shame.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
I quite like it too... Plus the red of the badge makes it that touch more subtle as you won't spot it immediately...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
That was my plan Dave - something subtle and not too in your face :biggrin:
IS200 Turbo for sale - http://www.outlawjapclub.co.uk/forum/sho...php?t=9945
mattross1313
04-07-2019, 09:12 AM #39Thanks for the feedback, I wasn't expecting everyone to like it. Like you say Stav doesnt really matter though as long as you like it
That was my plan Dave - something subtle and not too in your face :biggrin:
IS200 Turbo for sale - http://www.outlawjapclub.co.uk/forum/sho...php?t=9945
As it is now
![[Image: 44640777.jpg]](http://i203.photobucket.com/albums/aa181/mattross1313/Penny/44640777.jpg)
![[Image: aa728363.jpg]](http://i203.photobucket.com/albums/aa181/mattross1313/Penny/aa728363.jpg)
my side window design. the dark grey sections will be removed for ventilation.
Passenger side
![[Image: driverside.jpg]](http://i203.photobucket.com/albums/aa181/mattross1313/Penny/driverside.jpg)
drivers side
![[Image: driverside2.jpg]](http://i203.photobucket.com/albums/aa181/mattross1313/Penny/driverside2.jpg)
this is the current progress i have made on the floor piece. A colleague of mine suggested maybe having some small Touge Routes etched around the outside but I cannot find anything suitable. for this one the Jap writing will be lightly etched into the piece, then the vents on top and bottom will be straight through.
![[Image: floorpan.jpg]](http://i203.photobucket.com/albums/aa181/mattross1313/Penny/floorpan.jpg)
Matt :biggrin:
IS200 Turbo for sale - http://www.outlawjapclub.co.uk/forum/sho...php?t=9945
mattross1313
05-07-2019, 07:10 PM #40After some suggestions for when I re-do the perspex windows in the boot. I have mocked up some designs below with my "awesome" photoshop skills. I am pretty much set on the smaller side panels unless you guys come up with something better. I am looking for some inspiration for the larger floor pan. Hit me with your thoughts :thumbup1:
As it is now
my side window design. the dark grey sections will be removed for ventilation.
Passenger side
drivers side
this is the current progress i have made on the floor piece. A colleague of mine suggested maybe having some small Touge Routes etched around the outside but I cannot find anything suitable. for this one the Jap writing will be lightly etched into the piece, then the vents on top and bottom will be straight through.
Matt :biggrin:
IS200 Turbo for sale - http://www.outlawjapclub.co.uk/forum/sho...php?t=9945
1 Guest(s)
1 Guest(s)
Views 132,002
Last Post by
Views 97,605
Last Post by
Views 804
Last Post by
Views 2,391
Last Post by
Views 9,467
Last Post by
Views 4,556
Last Post by