Logo'd Battery Bars
Logo'd Battery Bars
Stoney Didn't get mine yet! Though by the look of these last few replies, I expect it fairly soon.
Check your PMs mate, I didn't get an address from you!
You'll get it quicker if you PM him direct with your address :thumbup:
Lexuspat i just cant wait for the next batch now lol.
the work done on these is fantastic.
I think he has a few spares, so you can always just send 'Robin H' a PM and ask what colour he has
sprinter2012
14-07-2019, 10:48 AM #61Stoney Didn't get mine yet! Though by the look of these last few replies, I expect it fairly soon.
Check your PMs mate, I didn't get an address from you!
You'll get it quicker if you PM him direct with your address :thumbup:
Lexuspat i just cant wait for the next batch now lol.
the work done on these is fantastic.
I think he has a few spares, so you can always just send 'Robin H' a PM and ask what colour he has
sprinter2012 Check your PMs mate, I didn't get an address from you!
You'll get it quicker if you PM him direct with your address :thumbup:
Darn and blast!
I thought I had replied to you, but obviously I forgot! My memory is getting useless, I swear. I blame old age, though I didn't expect it to get this bad by 26!
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:sprinter2012 Check your PMs mate, I didn't get an address from you!
You'll get it quicker if you PM him direct with your address :thumbup:
Darn and blast!
I thought I had replied to you, but obviously I forgot! My memory is getting useless, I swear. I blame old age, though I didn't expect it to get this bad by 26!
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
ad:
JDM black headlights, rear fog light conversion, JDM size number plates, JDM rear number plate garnish, JDM dash tray, wind deflectors, TRD body kit, white TRD gearknob, TTE lowering springs, TTE ARB's, K&N air filter, stainless steel A/C rings, stainless clock cover, radiator cooling panel, LED side light bulbs, blue reversing bulbs, fan washer jets, clear side repeaters, PIAA silicone wipers, Alpine IDA-X200 headunit, 17 x 8 et40 OZ Ultraleggera with 225/45/17 Toyo Proxes T-1R
Went to fit mine tonight, but it turns out i don't have a flat battery, so it doesn't fit... D'Oh. I knew i should have checked before i put my name down. I'll just need to remeber to get a proper battery the next time. ad:
JDM black headlights, rear fog light conversion, JDM size number plates, JDM rear number plate garnish, JDM dash tray, wind deflectors, TRD body kit, white TRD gearknob, TTE lowering springs, TTE ARB's, K&N air filter, stainless steel A/C rings, stainless clock cover, radiator cooling panel, LED side light bulbs, blue reversing bulbs, fan washer jets, clear side repeaters, PIAA silicone wipers, Alpine IDA-X200 headunit, 17 x 8 et40 OZ Ultraleggera with 225/45/17 Toyo Proxes T-1R
Ally Went to fit mine tonight, but it turns out i don't have a flat battery, so it doesn't fit... D'Oh. I knew i should have checked before i put my name down. I'll just need to remeber to get a proper battery the next time.
In what way is it not flat? Do the caps on the top stick up or something?
sprinter2012
14-07-2019, 05:19 PM #65Ally Went to fit mine tonight, but it turns out i don't have a flat battery, so it doesn't fit... D'Oh. I knew i should have checked before i put my name down. I'll just need to remeber to get a proper battery the next time.
In what way is it not flat? Do the caps on the top stick up or something?
JDM black headlights, rear fog light conversion, JDM size number plates, JDM rear number plate garnish, JDM dash tray, wind deflectors, TRD body kit, white TRD gearknob, TTE lowering springs, TTE ARB's, K&N air filter, stainless steel A/C rings, stainless clock cover, radiator cooling panel, LED side light bulbs, blue reversing bulbs, fan washer jets, clear side repeaters, PIAA silicone wipers, Alpine IDA-X200 headunit, 17 x 8 et40 OZ Ultraleggera with 225/45/17 Toyo Proxes T-1R
Yeah, there's 5 or 6 caps that stick up. It actually fits through the gap between the caps, but i can't get the screw onto the thread. The battery has been on the car for at least 6 years, so i'll be due a new one soonish anyway :whistling:
JDM black headlights, rear fog light conversion, JDM size number plates, JDM rear number plate garnish, JDM dash tray, wind deflectors, TRD body kit, white TRD gearknob, TTE lowering springs, TTE ARB's, K&N air filter, stainless steel A/C rings, stainless clock cover, radiator cooling panel, LED side light bulbs, blue reversing bulbs, fan washer jets, clear side repeaters, PIAA silicone wipers, Alpine IDA-X200 headunit, 17 x 8 et40 OZ Ultraleggera with 225/45/17 Toyo Proxes T-1R
sorry I've not been on sooner, don't get as much time on the net at the moment as I would like.
I hope that everyone who has got there bars so far and is happy with them, if not please contact me.
@ Stoney pm your address and I'll get it posted out asap
@ Pat you should have a pm :wink:
@ Ally I did say they are for the flat top batteries, the code for the battery I have on my altezza is 005L I think it's the same as the IS maybe some could double check
I do have a few Lexus bars left which have not been anodised yet so if any body wants 1 give me a pm
as you could see in the pic that sprinter posted up I've had a few toyota bars done and will be getting some anodised next week if anybody is interested let me know.
2 x blue
2 x red
1 x purple
1 x black
1 x gold
1 x silver
1 x magnesium
I've also picked up the custom 1UZ-FE bars that sprinter had designed.
![[Image: 299493_192272147506066_100001698460944_4...0605_n.jpg]](https://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/299493_192272147506066_100001698460944_495197_5440605_n.jpg)
so they will be sent out on tuesday guys
think thats it
Hi Guys
sorry I've not been on sooner, don't get as much time on the net at the moment as I would like.
I hope that everyone who has got there bars so far and is happy with them, if not please contact me.
@ Stoney pm your address and I'll get it posted out asap
@ Pat you should have a pm :wink:
@ Ally I did say they are for the flat top batteries, the code for the battery I have on my altezza is 005L I think it's the same as the IS maybe some could double check
I do have a few Lexus bars left which have not been anodised yet so if any body wants 1 give me a pm
as you could see in the pic that sprinter posted up I've had a few toyota bars done and will be getting some anodised next week if anybody is interested let me know.
2 x blue
2 x red
1 x purple
1 x black
1 x gold
1 x silver
1 x magnesium
I've also picked up the custom 1UZ-FE bars that sprinter had designed.
so they will be sent out on tuesday guys
think thats it
My bar arrived tuesday, haven't fitted it yet but it looks great
sprinter2012
15-07-2019, 12:04 PM #68I'm impressed with how the custom bars have come out, I might have to get an engine transplant so I can have one :thumbup1:
My bar arrived tuesday, haven't fitted it yet but it looks great
jay_russell
15-07-2019, 12:42 PM #70mine came today but no badge (tte) in the packet? have you sent in in another or did you forget to put it in?
1 Guest(s)
1 Guest(s)