FS: Come and get your JDM parts ya vultures!!! Jim parting out!!!!
FS: Come and get your JDM parts ya vultures!!! Jim parting out!!!!
24-08-2019, 08:00 AM
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
Mate if I was closer I'd come remove the engine for you..I really would....
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
24-08-2019, 08:26 AM
ormi Mate if I was closer I'd come remove the engine for you..I really would....
Please don't say that. It's like waving a carrot in front of a donkey
At this point I'd rather think that my car was a write-off and nobody in the world could fix it. The temptation to just take out a big loan and go the whole hog with a massive rebuild at a professional garage has been hard to fight.
Edited 05-10-2011, 12:13 PM by jimxms.
ormi Mate if I was closer I'd come remove the engine for you..I really would....
Please don't say that. It's like waving a carrot in front of a donkey
At this point I'd rather think that my car was a write-off and nobody in the world could fix it. The temptation to just take out a big loan and go the whole hog with a massive rebuild at a professional garage has been hard to fight.
24-08-2019, 08:33 AM
There is always hope Jim
Ormi HOw long would this take to do ad what tools would we need to source locally for you to help Jim Out? due to distance if you were to fly down?
There is always hope Jim
24-08-2019, 08:42 AM
Rabster Ormi HOw long would this take to do ad what tools would we need to source locally for you to help Jim Out? due to distance if you were to fly down?
There is always hope Jim
I may have access to an engine crane and a couple of bodies to help.
speedfreek
24-08-2019, 08:42 AM #144Rabster Ormi HOw long would this take to do ad what tools would we need to source locally for you to help Jim Out? due to distance if you were to fly down?
There is always hope Jim
I may have access to an engine crane and a couple of bodies to help.
'99 Lexus IS200 SE Navigator
[SIZE=3]'93 Mazda Eunos Roadster Turbo[/SIZE]
(Current project)
[SIZE=3]'93 Mazda Eunos Roadster Turbo[/SIZE]
(Current project)
24-08-2019, 09:25 AM
But I wouldn't touch the car till you have decided if your going to court or not..as for tools...various spanners ratchets sockets screwdrivers and a few levers and a powerbar..
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
To be honest removing an engine wouldn't take long..but I would look for a good second hand one first before rebuilding the one you have it will also be cheaper and make the job quicker..
But I wouldn't touch the car till you have decided if your going to court or not..as for tools...various spanners ratchets sockets screwdrivers and a few levers and a powerbar..
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
![[Image: Powerbar%20Performance%20Bar.JPG]](http://www.discountcyclesdirect.co.uk/images/Powerbar%20Performance%20Bar.JPG)
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired.
24-08-2019, 09:37 AM
ormi To be honest removing an engine wouldn't take long..but I would look for a good second hand one first before rebuilding the one you have it will also be cheaper and make the job quicker..
But I wouldn't touch the car till you have decided if your going to court or not..as for tools...various spanners ratchets sockets screwdrivers and a few levers and a powerbar..
Thats the biggest problem tbh. I've yet to come across an IS300 engine for anywhere near a decent price.
There's plenty of GS300 engines, but something tells me they aren't a direct bolt up?
ormi To be honest removing an engine wouldn't take long..but I would look for a good second hand one first before rebuilding the one you have it will also be cheaper and make the job quicker..
But I wouldn't touch the car till you have decided if your going to court or not..as for tools...various spanners ratchets sockets screwdrivers and a few levers and a powerbar..
Thats the biggest problem tbh. I've yet to come across an IS300 engine for anywhere near a decent price.
There's plenty of GS300 engines, but something tells me they aren't a direct bolt up?
24-08-2019, 09:49 AM
we can all get it running again there is enough knowledge on this place
But on the flip side you will get more money if you break the car now.....
Jim the ball is in your court now mate
we can all get it running again there is enough knowledge on this place
But on the flip side you will get more money if you break the car now.....
24-08-2019, 09:58 AM
Rabster hmmwhy did that take like halfhour to appear lol
lol
Do you think that if I returned my car completely back to stock and fixed the engine I would get more for it as a standard IS300, or more for it if I stripped the car for parts (not including the performance parts)?
Rabster hmmwhy did that take like halfhour to appear lol
lol
Do you think that if I returned my car completely back to stock and fixed the engine I would get more for it as a standard IS300, or more for it if I stripped the car for parts (not including the performance parts)?
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 0
Views 173
Views 173
04-08-2021, 11:44 AM
Last Post byColin G
Last Post by
Replies 25
Views 1,471
Views 1,471
24-07-2021, 12:10 PM
Last Post byCammyGrieve
Last Post by
Replies 15
Views 1,349
Views 1,349
10-09-2020, 04:38 PM
Last Post byRabster
Last Post by
Replies 8
Views 786
Views 786
21-08-2020, 10:02 AM
Last Post bySparkystav
Last Post by
Replies 23
Views 2,169
Views 2,169
23-07-2020, 08:25 PM
Last Post byLewed_is200
Last Post by
Replies 92
Views 6,152
Views 6,152
16-05-2020, 09:12 AM
Last Post byspeedfreek
Last Post by