Project: DIY Supercharger
Project: DIY Supercharger
![[Image: Flanges1.jpg]](http://i462.photobucket.com/albums/qq341/dh-all-the-way/DIY%20SC/Flanges1.jpg)
EDIT: Just updated the drawing to have thicker lines as it was hard to see.
sprinter2012
04-09-2020, 06:59 PM #71Been doing a bit of drawing work so I'm more prepared once the cradle arrives, got the outlet flange drawn up. Just need to print it out 1:1 so I can check I've definitely got it right, and then need to finish of the intake flange...
EDIT: Just updated the drawing to have thicker lines as it was hard to see.
![[Image: MountingLayout.jpg]](http://i462.photobucket.com/albums/qq341/dh-all-the-way/DIY%20SC/MountingLayout.jpg)
sprinter2012
05-09-2020, 07:22 PM #72Spent a bit more time with the verniers and computer tonight, managed to draw up the exact positions of the mounting holes, none of which are square to anything on the charger, they are all just in random places. And also positioned the outlet drawing I already did in it's actual location relative to the cradle holes. I also added the ports inside the outlet just for refference too.
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
reganlives
06-09-2020, 10:05 AM #74So once/if the cradles are made and if I got hold of a charger then what about the other bits that are needed? What about pipework etc? Would this need to be custom made?
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
So if I was looking on ebay , what merc charger should I be looking for , as in what car would need to be breaking so you would know that it was the correct one ??
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
http://www.ebay.co.uk/itm/Compresor-EATO...2a243c7392
reganlives
06-09-2020, 11:23 AM #77there you go, also on the CLK's apparently.
http://www.ebay.co.uk/itm/Compresor-EATO...2a243c7392
Moley So if I was looking on ebay , what merc charger should I be looking for , as in what car would need to be breaking so you would know that it was the correct one ??From the top of my head, the Eaton M62 supercharger with the correct nose cone can be found in the following Mercedes models (pre -99)
C 200
C 230
CLK 200
CLK 230
SLK 200
SLK 230
P.Lindblom
06-09-2020, 11:40 AM #78Moley So if I was looking on ebay , what merc charger should I be looking for , as in what car would need to be breaking so you would know that it was the correct one ??From the top of my head, the Eaton M62 supercharger with the correct nose cone can be found in the following Mercedes models (pre -99)
C 200
C 230
CLK 200
CLK 230
SLK 200
SLK 230
reganlives
06-09-2020, 12:27 PM #80Ahh so its only certain ones then that will fit? Which bit is the nose cone?
3 Guest(s)
3 Guest(s)
Views 644
Last Post by
Views 772
Last Post by
Views 265
Last Post by
Views 2,164
Last Post by
Views 471
Last Post by
Views 1,353
Last Post by
Views 769
Last Post by
Views 709
Last Post by
Views 706
Last Post by