Bentley Continental Flying Spur

Pages (2): 1 2 Next

Invisible Touch Detailing
Senior Member

423

01-01-2021, 05:06 PM

Invisible Touch Detailing

01-01-2021, 05:06 PM #1

Hi,

Here we have a Bentley Continental Flying Spur recently brought to Invisible Touch Detailing. With the owner having recently purchased the vehicle, he was keen for it to be inspected and receive various treatments to bring out its true potential.

This was the vehicle on arrival

[Image: DSC09662_zpsd2523b1d.jpg]

[Image: DSC09665_zpsfca2a144.jpg]

[Image: DSC09666_zpsd20e0e9e.jpg]

[Image: DSC09667_zps0c15c4e1.jpg]

[Image: DSC09668_zps5e0b3445.jpg]

[Image: DSC09669_zpsa2ac6ca3.jpg]

[Image: DSC09670_zpseff7617a.jpg]

[Image: DSC09671_zps05d3d51e.jpg]

[Image: DSC09672_zpsc757ae94.jpg]

[Image: DSC09673_zps27763a49.jpg]

[Image: DSC09674_zpsef64b84d.jpg]

[Image: DSC09675_zpse98b294a.jpg]

[Image: DSC09677_zpsb143d0a2.jpg]

[Image: DSC09678_zps33b6bf73.jpg]

[Image: DSC09679_zps0fe4bcf7.jpg]

Invisible Touch Detailing
Senior Member

423

01-01-2021, 05:08 PM

The vehicle was in reasonable condition, but could be enhanced in many ways. A quick few shots of the paintwork in sunlight which showed swirls and was lacking depth and clarity

[Image: DSC09685_zpsfe5d6da8.jpg]

The first task was the engine bay. Not wanting to get too much water within certain areas, this machine was used which is attached to an airline. The chosen product was APC mixed with warm water. The attached airline offers a controllable jet of air mixed with the solution to deeply cleanse heavily soiled areas in a safe way, using minimal water in the process. Fine brushes were then used to tackle more stubborn areas and then wiped dry. Once degreased, the engine bay will be returned to later in the detail.

[Image: DSC09688_zps90cefed1.jpg]

The wheels were cleaned with Bilberry and tyres with APC

[Image: DSC09693_zpsdd8a3b14.jpg]

All door/boot/fuel shuts were then cleaned with APC. The vehicle was then jetwashed and snowfoamed

[Image: DSC09695_zps24b877e7.jpg]

Left to dwell and then rinsed

[Image: DSC09697_zps80c1bb3a.jpg]

After being washed via 2 bucket method, it was then clayed to remove bonded contamination, washed again and taken inside to be dried

[Image: DSC09698_zpsd3bedfd2.jpg]

Invisible Touch Detailing

01-01-2021, 05:08 PM #2

[Image: DSC09680_zps40a1b4e0.jpg]

[Image: DSC09681_zps04d16bf9.jpg]

[Image: DSC09682_zps4367a934.jpg]

[Image: DSC09683_zpsfa4aa1cd.jpg]

[Image: DSC09684_zps7a794c4b.jpg]

The vehicle was in reasonable condition, but could be enhanced in many ways. A quick few shots of the paintwork in sunlight which showed swirls and was lacking depth and clarity

[Image: DSC09685_zpsfe5d6da8.jpg]

[Image: DSC09686_zps6c4b01a2.jpg]

[Image: DSC09687_zps9d87d11a.jpg]

The first task was the engine bay. Not wanting to get too much water within certain areas, this machine was used which is attached to an airline. The chosen product was APC mixed with warm water. The attached airline offers a controllable jet of air mixed with the solution to deeply cleanse heavily soiled areas in a safe way, using minimal water in the process. Fine brushes were then used to tackle more stubborn areas and then wiped dry. Once degreased, the engine bay will be returned to later in the detail.

[Image: DSC09688_zps90cefed1.jpg]

The wheels were cleaned with Bilberry and tyres with APC

[Image: DSC09693_zpsdd8a3b14.jpg]

[Image: DSC09694_zps7f7e51d3.jpg]

All door/boot/fuel shuts were then cleaned with APC. The vehicle was then jetwashed and snowfoamed

[Image: DSC09695_zps24b877e7.jpg]

Left to dwell and then rinsed

[Image: DSC09697_zps80c1bb3a.jpg]

After being washed via 2 bucket method, it was then clayed to remove bonded contamination, washed again and taken inside to be dried

[Image: DSC09698_zpsd3bedfd2.jpg]

Invisible Touch Detailing
Senior Member

423

01-01-2021, 05:09 PM

Paint thickness readings were then taken and a report produced at the customers request of any paintwork the vehicle had received

[Image: DSC09699_zpsa793466d.jpg]

It was decided to carry out a Stage 1 paint enhancement which i performed mixing the following 2 polishes via a makita rotary and a 3M polishing pad

[Image: DSC09711_zpsd1730ae7.jpg]

A few shots during the polishing process

[Image: DSC09716_zpsb0de45d8.jpg]

Invisible Touch Detailing

01-01-2021, 05:09 PM #3

Paint thickness readings were then taken and a report produced at the customers request of any paintwork the vehicle had received

[Image: DSC09699_zpsa793466d.jpg]

[Image: DSC09700_zpse9876543.jpg]

[Image: DSC09701_zpsa4fa13d1.jpg]

[Image: DSC09703_zps4195daf5.jpg]

[Image: DSC09704_zps4510feac.jpg]

[Image: DSC09705_zps4eae0a9e.jpg]

[Image: DSC09706_zpsfb4f6245.jpg]

[Image: DSC09707_zps3a8f018d.jpg]

[Image: DSC09709_zps4a818b96.jpg]

It was decided to carry out a Stage 1 paint enhancement which i performed mixing the following 2 polishes via a makita rotary and a 3M polishing pad

[Image: DSC09711_zpsd1730ae7.jpg]

A few shots during the polishing process

[Image: DSC09716_zpsb0de45d8.jpg]

[Image: DSC09713_zpscecbce66.jpg]

[Image: DSC09718_zps8851b55f.jpg]

[Image: DSC09723_zps5ec8be82.jpg]

[Image: DSC09719_zps0b37228f.jpg]

Invisible Touch Detailing
Senior Member

423

01-01-2021, 05:11 PM

Invisible Touch Detailing

01-01-2021, 05:11 PM #4

[Image: DSC09721_zps901f5227.jpg]

[Image: DSC09727_zpsa4417bf8.jpg]

[Image: DSC09729_zps530e678d.jpg]

[Image: DSC09731_zpsb6db4f7f.jpg]

[Image: DSC09734_zps7e0ee25b.jpg]

[Image: DSC09735_zpsc65171c7.jpg]

[Image: DSC09736_zps89565ec7.jpg]

[Image: DSC09743_zpsd76c324f.jpg]

[Image: DSC09745_zps58d0bbdb.jpg]

[Image: DSC09746_zpsf3165b61.jpg]

[Image: DSC09747_zpsc473603f.jpg]

[Image: DSC09752_zps0f276bb2.jpg]

[Image: DSC09751_zpsdd793f18.jpg]

[Image: DSC09755_zps0658c22d.jpg]

[Image: DSC09758_zps819d19c5.jpg]

Invisible Touch Detailing
Senior Member

423

01-01-2021, 05:12 PM

Once all polishing was complete i returned to the engine bay. Aerospace 303 was applied to a wet surface and allowed to dry naturally

[Image: DSC09759_zpsf9408496.jpg]

At this stage the rusted front number plate screws were removed and replaced as the vehicle could not leave with screws like this!

[Image: DSC09776_zps4c1dd91c.jpg]

Swissvax Cleaner Fluid was then applied to prepare the paint to receive 2 applications of Best of Show Wax

[Image: DSC09798_zps2b2c6465.jpg]

The interior was dusted, hoovered, glass polished and Gliptone leather conditioner applied

[Image: DSC09796_zps11f65f5c.jpg]

Endurance Gel applied to the tyres and sealant applied to the wheels

[Image: DSC09790_zpsb355f951.jpg]

The exhausts were polished

[Image: DSC09792_zpsa2d996f4.jpg]

Invisible Touch Detailing

01-01-2021, 05:12 PM #5

Once all polishing was complete i returned to the engine bay. Aerospace 303 was applied to a wet surface and allowed to dry naturally

[Image: DSC09759_zpsf9408496.jpg]

At this stage the rusted front number plate screws were removed and replaced as the vehicle could not leave with screws like this!

[Image: DSC09776_zps4c1dd91c.jpg]

Swissvax Cleaner Fluid was then applied to prepare the paint to receive 2 applications of Best of Show Wax

[Image: DSC09798_zps2b2c6465.jpg]

[Image: DSC09777_zps46253d84.jpg]

The interior was dusted, hoovered, glass polished and Gliptone leather conditioner applied

[Image: DSC09796_zps11f65f5c.jpg]

[Image: DSC09778_zpse321b23c.jpg]

[Image: DSC09780_zps2f5a05f9.jpg]

[Image: DSC09781_zps3febd487.jpg]

[Image: DSC09783_zps1f49e5ca.jpg]

[Image: DSC09784_zpsa0cbd313.jpg]

[Image: DSC09785_zps1395f7e6.jpg]

[Image: DSC09786_zps248ac035.jpg]

Endurance Gel applied to the tyres and sealant applied to the wheels

[Image: DSC09790_zpsb355f951.jpg]

The exhausts were polished

[Image: DSC09792_zpsa2d996f4.jpg]

Invisible Touch Detailing
Senior Member

423

01-01-2021, 05:14 PM

Tyre pressures were set to the manufacturers recommendations

[Image: DSC09799_zps15c5e4eb.jpg]

Finally, Zaino Z8 spray sealant was applied to the paintwork prior to collection

[Image: DSC09797_zps7d435386.jpg]

These were the final pictures...

[Image: DSC09763_zps98db0fdc.jpg]

Invisible Touch Detailing

01-01-2021, 05:14 PM #6

Tyre pressures were set to the manufacturers recommendations

[Image: DSC09799_zps15c5e4eb.jpg]

Finally, Zaino Z8 spray sealant was applied to the paintwork prior to collection

[Image: DSC09797_zps7d435386.jpg]

These were the final pictures...

[Image: DSC09763_zps98db0fdc.jpg]

[Image: DSC09766_zpsaac145dd.jpg]

[Image: DSC09769_zps43a0307f.jpg]

[Image: DSC09770_zpsdc9f97a1.jpg]

[Image: DSC09771_zps4058e3e2.jpg]

[Image: DSC09772_zpsf5395274.jpg]

[Image: DSC09774_zpsf76b112c.jpg]

[Image: DSC09775_zps61dbc927.jpg]

[Image: DSC09800_zpsa18b3a5d.jpg]

[Image: DSC09804_zpsb3962814.jpg]

[Image: DSC09806_zps86b2eab4.jpg]

[Image: DSC09809_zpsf574622a.jpg]

[Image: DSC09810_zpsf0da862b.jpg]

Invisible Touch Detailing
Senior Member

423

01-01-2021, 05:15 PM

Invisible Touch Detailing

01-01-2021, 05:15 PM #7

[Image: DSC09812_zps078cf284.jpg]

[Image: DSC09813_zps0cf7b83a.jpg]

[Image: DSC09815_zpsbfb9d765.jpg]

[Image: DSC09816_zps356e1cd3.jpg]

[Image: DSC09817_zps090c9e07.jpg]

[Image: DSC09819_zps67ea6736.jpg]

[Image: DSC09822_zpse269de84.jpg]

[Image: DSC09825_zpsb4fc56e5.jpg]

[Image: DSC09831_zpsde8e5386.jpg]

[Image: DSC09832_zpsa530b552.jpg]

[Image: DSC09833_zps14017e56.jpg]

[Image: DSC09834_zpse4cf947a.jpg]

[Image: DSC09837_zps0b0f311b.jpg]

[Image: DSC09839_zpsf810963e.jpg]

[Image: DSC09843_zpsecaa0d7d.jpg]

Invisible Touch Detailing
Senior Member

423

01-01-2021, 05:16 PM

I hope you enjoyed the read and thanks for looking,

Christian

Invisible Touch Detailing

01-01-2021, 05:16 PM #8

[Image: DSC09845_zps1af5a910.jpg]

[Image: DSC09847_zps10b9d2b8.jpg]

[Image: DSC09849_zpsac8db89f.jpg]

[Image: DSC09857_zpsb0f27167.jpg]

[Image: DSC09858_zpsb9882214.jpg]

I hope you enjoyed the read and thanks for looking,

Christian

Barry
Member

221

01-01-2021, 06:11 PM

Amazing work as always Christian.

I will definately be bringing my IS200 over to you, as a rule what are your rough prices for set treatments prior to deciding whether any extras are needed?

Barry

01-01-2021, 06:11 PM #9

Amazing work as always Christian.

I will definately be bringing my IS200 over to you, as a rule what are your rough prices for set treatments prior to deciding whether any extras are needed?

FirebirdPhil
Posting Freak

7,101

01-01-2021, 06:16 PM

#10

Beautiful car and top draw work - as ever!!

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

FirebirdPhil

01-01-2021, 06:16 PM #10

Beautiful car and top draw work - as ever!!

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

Pages (2): 1 2 Next

Recently Browsing
1 Guest(s)