Jimbobs Lexus IS200 Turbo!
Jimbobs Lexus IS200 Turbo!
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
That hopefully can be mapped out mate don't worry. Glad it's running
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
well today i found some vacuum leaks and sorted idle is alot better now 
i took her for a little drive and when i come up to positive boost it sounds as if the waste gate goes and then when i come to a stand still the car stalls is the stall down to the fuel cut settings?
i dont actually get into positive boost! my vacuum is 15 psi which is not brilliant should be a little higher than that
I looked into my boost controller and i have got it set up to 0.5 bar but i barel get to 0 bar
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Is the wastegate plumbed the right way?
As for the stalling. That will be related to the throttle setup IMHO. You need to add a standalone icv run by the emanage.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
I literally just said to my dad that I could be something like that lol
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Yep. I've used one off a vauxhall.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
![[Image: yhyde5y6.jpg]](http://img.tapatalk.com/d/13/05/05/yhyde5y6.jpg)
![[Image: ehemy3ad.jpg]](http://img.tapatalk.com/d/13/05/05/ehemy3ad.jpg)
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
I made a little bracket and adapter from the inlet manifold. Ill get some pics of it fitted. 
One of the icv:
![[Image: yhyde5y6.jpg]](http://img.tapatalk.com/d/13/05/05/yhyde5y6.jpg)
You can see the adapter on the side ofthe manifold here:
![[Image: ehemy3ad.jpg]](http://img.tapatalk.com/d/13/05/05/ehemy3ad.jpg)
I just tapped the hole and screwed the adapter in
It can be controlled by pulse width modulation from the ecu.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
well this is getting a little more complicated lol 
Today i took her out and the fluttering noise i am getting is not my BOV or the wastegate where the hell is it coming from??? 
When i hit boost the car is bogging and then the revs die down to eventually stalling like a fail safe im a little lost now!!